powderИзвестия вузов. Порошковая металлургия и функциональные покрытияPowder Metallurgy аnd Functional Coatings (Izvestiya Vuzov. Poroshkovaya Metallurgiya i Funktsional'nye Pokrytiya)1997-308X2412-8767НИТУ "МИСИС"10.17073/1997-308X-2018-4-62-72powder-406Research ArticleТугоплавкие, керамические и композиционные материалыRefractory, Ceramic, and Composite MaterialsВысокопрочные композиционные материалы на основе алюминия, упрочненные микро- и наноструктурами (миниобзор)High-strength composite materials based on aluminum reinforced by micro and nanostructures (mini review)КонопацкийА. С.KonopatskyA. S.

Канд. техн. наук, науч. сотр. научно-исследовательской лаборатории «Неорганические наноматериалы».

119049, г. Москва, Ленинский пр-т, 4.

Cand. Sci. (Tech.), research scientist of the Research laboratory «Inorganic nanomaterials».

119049, Russia, Moscow, Leninskii pr., 4.

ankonopatsky@gmail.comЮсуповХ. У.YusupovKh. U.

Инженер той же лаборатории.

119049, г. Москва, Ленинский пр-т, 4.

Engineer of the Research laboratory «Inorganic nanomaterials».

119049, Russia, Moscow, Leninskii pr., 4.

khabibyusupov2014@gmail.comCorthayС.CorthayC.

Лаборант той же лаборатории, аспирант кафедры порошковой металлургии и функциональных покрытий (ПМиФП).

119049, г. Москва, Ленинский пр-т, 4.

Postgraduate student of the Department of powder metallurgy аnd functional coatings (PM&FC), engineer of the Research laboratory «Inorganic nanomaterials».

119049, Russia, Moscow, Leninskii pr., 4.

shakticorthay@protonmail.comМатвеевА. Т.MatveevA. T.

Канд. физ.-мат. наук, ст. науч. сотр. той же лаборатории.

119049, г. Москва, Ленинский пр-т, 4.

Cand. Sci. (Phys.-Math.), senior research scientist of the Research laboratory «Inorganic nanomaterials».

119049, Russia, Moscow, Leninskii pr., 4.

matveev59@gmail.comКовальскийА. М.KovalskiiA. M.

Канд. геол.-минер. наук, ст. науч. сотр. той же лаборатории.

119049, г. Москва, Ленинский пр-т, 4.

Cand. Sci. (Geol.-Miner.), senior research scientist of the Research laboratory «Inorganic nanomaterials».

119049, Russia, Moscow, Leninskii pr., 4.

andreykovalskii@gmail.comШтанскийД. В.ShtanskyD. V.

Докт. физ.-мат. наук, зав. науч.-исслед. лабораторией «Неорганические наноматериалы», проф. кафедры ПМиФП, гл. науч. cотр. Научно-учебного центра СВС.

119049, г. Москва, Ленинский пр-т, 4.

Dr. Sci. (Phys.-Math.), head of the Research laboratory «Inorganic nanomaterials», principal scientist of the Scientific-educational Centre of SHS of MISIS–ISMAN, prof. of the Department of PM&FC.

119049, Russia, Moscow, Leninskii pr., 4.

shtansky@shs.misis.ruНациональный исследовательский технологический университет (НИТУ) «МИСиС».РоссияNational University of Science and Technology (NUST) «MISIS».Russian Federation201814122018046272Copyright © НИТУ "МИСИС", 20182018НИТУ "МИСИС"НИТУ "МИСИС"https://powder.misis.ru/jour/about/submissions#copyrightNoticehttps://powder.misis.ru/jour/article/view/406

Настоящий миниобзор посвящен анализу последних достижений в области разработки композиционных материалов (КМ) на основе алюминия, упрочненных микро- и наноструктурами. Рассматриваются методы получения КМ, различные упрочняющие добавки (Al2O3, AlN, SiC, CuO, B4C, Li3N, C, BN) и их морфологические типы (нанотрубки, нанопластины, микро- и наночастицы), а также структура и свойства КМ. Показана важность методов теоретического моделирования при изучении прочности границ раздела в КМ.

This mini review focuses on the analysis of the latest advances in the development of composite materials (CM) based on aluminum reinforced by micro and nanostructures. CM fabrication methods, different reinforcing additives (Al2O3, AlN, SiC, CuO, B4C, Li3N, C, BN) and their morphological types (nanotubes, nanoplates, micro and nanoparticles), and the structure and properties of CM are considered. The paper demonstrates the importance of theoretical modeling methods in studying the strength of interfaces in CM.

композиционные материалынаноструктурыалюминийпрочностьcomposite materialsnanostructuresaluminumstrengthReferencesChoi H., Shin J., Min B., Park J., Bae D. Reinforcing effects of carbon nanotubes in structural aluminum matrix nanocomposites. J. Mater. Res. 2009. Vol. 24. P. 2610—2616.Choi H., Shin J., Min B., Park J., Bae D. Reinforcing effects of carbon nanotubes in structural aluminum matrix nanocomposites. J. Mater. Res. 2009. Vol. 24. P. 2610—2616.Alizadeh M., Paydar M.H. Fabrication of nanostructure Al/SiCP composite by accumulative roll-bonding (ARB) process. J. Alloys Compd. 2010. Vol. 492. P. 231—235.Alizadeh M., Paydar M.H. Fabrication of nanostructure Al/SiCP composite by accumulative roll-bonding (ARB) process. J. Alloys Compd. 2010. Vol. 492. P. 231—235.Casati R., Wei X., Xia K., Dellasega D., Tuissi A., Villa E., Vedani M. Mechanical and functional properties of ultrafine grained Al wires reinforced by nano-Al2O3 particles. Mater. Des. 2014. Vol. 64. P. 102—109.Casati R., Wei X., Xia K., Dellasega D., Tuissi A., Villa E., Vedani M. Mechanical and functional properties of ultrafine grained Al wires reinforced by nano-Al2O3 particles. Mater. Des. 2014. Vol. 64. P. 102—109.Yang X., Zou T., Shi C., Liu E., He C., Zhao N. Effect of carbon nanotube (CNT) content on the properties of in-situ synthesis CNT reinforced Al composites. Mater. Sci. Eng. A. 2016. Vol. 660. P. 11—18.Yang X., Zou T., Shi C., Liu E., He C., Zhao N. Effect of carbon nanotube (CNT) content on the properties of in-situ synthesis CNT reinforced Al composites. Mater. Sci. Eng. A. 2016. Vol. 660. P. 11—18.Rahimian M., Parvin N., Ehsani N. Investigation of particle size and amount of alumina on microstructure and mechanical properties of Al matrix composite made by powder metallurgy. Mater. Sci. Eng. A. 2010. Vol. 527. P. 1031—1038.Rahimian M., Parvin N., Ehsani N. Investigation of particle size and amount of alumina on microstructure and mechanical properties of Al matrix composite made by powder metallurgy. Mater. Sci. Eng. A. 2010. Vol. 527. P. 1031—1038.Zabihi M., Toroghinejad M.R., Shafyei A. Application of powder metallurgy and hot rolling processes for manufacturing aluminum/alumina composite strips. Mater. Sci. Eng. A. 2013. Vol. 560. P. 567—574.Zabihi M., Toroghinejad M.R., Shafyei A. Application of powder metallurgy and hot rolling processes for manufacturing aluminum/alumina composite strips. Mater. Sci. Eng. A. 2013. Vol. 560. P. 567—574.Sweet G.A., Brochu M., Hexemer R.L., Donaldson I.W., Bishop D.P. Consolidation of aluminum-based metal matrix composites via spark plasma sintering. Mater. Sci. Eng. A. 2015. Vol. 648. P. 123—133.Sweet G.A., Brochu M., Hexemer R.L., Donaldson I.W., Bishop D.P. Consolidation of aluminum-based metal matrix composites via spark plasma sintering. Mater. Sci. Eng. A. 2015. Vol. 648. P. 123—133.Chen C., Guo L., Luo J., Hao J., Guo Z., Volinsky A.A. Aluminum powder size and microstructure effectson properties of boron nitride reinforced aluminum matrix composites fabricated by semi-solid powder metallurgy. Mater. Sci. Eng. A. 2015. Vol. 646. P. 306—314.Chen C., Guo L., Luo J., Hao J., Guo Z., Volinsky A.A. Aluminum powder size and microstructure effectson properties of boron nitride reinforced aluminum matrix composites fabricated by semi-solid powder metallurgy. Mater. Sci. Eng. A. 2015. Vol. 646. P. 306—314.Saheb N., Iqbal Z., Khalil A., Hakeem A.S., Aqeeli N.A., Laoui T., Al-Qutub A., Kirchner R. Spark plasma sintering of metals and metal matrix nanocomposites: A review. J. Nanomater. 2012. Vol. 2012. Article 983470.Saheb N., Iqbal Z., Khalil A., Hakeem A.S., Aqeeli N.A., Laoui T., Al-Qutub A., Kirchner R. Spark plasma sintering of metals and metal matrix nanocomposites: A review. J. Nanomater. 2012. Vol. 2012. Article 983470.Udhayabanu V., Ravi K.R., Murty B.S. Development of in situ NiAl—Al2O3 nanocomposite by reactive milling and spark plasma sintering. J. Alloys Compd. 2011. Vol. 509. P. S223—S228.Udhayabanu V., Ravi K.R., Murty B.S. Development of in situ NiAl—Al2O3 nanocomposite by reactive milling and spark plasma sintering. J. Alloys Compd. 2011. Vol. 509. P. S223—S228.Zhang Z.H., Liu Z.F., Lu J.F., Shen X.B., Wang F.C., Wang Y.D. The sintering mechanism in spark plasma sintering – Proof of the occurrence of spark discharge. Scr. Mater. 2014. Vol. 81. P. 56—59.Zhang Z.H., Liu Z.F., Lu J.F., Shen X.B., Wang F.C., Wang Y.D. The sintering mechanism in spark plasma sintering – Proof of the occurrence of spark discharge. Scr. Mater. 2014. Vol. 81. P. 56—59.Lahiri D., Hadjikhani A., Zhanga C., Xing T., Li L.H., Chen Y., Agarwal A. Boron nitride nanotubes reinforced aluminum composites prepared by spark plasma sintering: Microstructure, mechanical properties and deformation behavior. Mater. Sci. Eng. A. 2013. Vol. 574. P. 149—156.Lahiri D., Hadjikhani A., Zhanga C., Xing T., Li L.H., Chen Y., Agarwal A. Boron nitride nanotubes reinforced aluminum composites prepared by spark plasma sintering: Microstructure, mechanical properties and deformation behavior. Mater. Sci. Eng. A. 2013. Vol. 574. P. 149—156.Xue Y., Jiang B., Bourgeois L., Dai P., Mitome M., Zhang C., Yamaguchi M., Matveev A., Tang C., Bando Y., Tsuchiya K., Golberg D. Aluminum matrix composites reinforced with multi-walled boron nitride nanotubes fabricated by a high-pressure torsion technique. Mater. Des. 2015. Vol. 88. P. 451—460.Xue Y., Jiang B., Bourgeois L., Dai P., Mitome M., Zhang C., Yamaguchi M., Matveev A., Tang C., Bando Y., Tsuchiya K., Golberg D. Aluminum matrix composites reinforced with multi-walled boron nitride nanotubes fabricated by a high-pressure torsion technique. Mater. Des. 2015. Vol. 88. P. 451—460.Tavoosi M., Karimzadeh F., Enayati M.H., Heidarpour A. Bulk Al-Zn/Al2O3 nanocomposite prepared by reactive milling and hot pressing methods. J. Alloys Compd. 2009. Vol. 475. P. 198—201.Tavoosi M., Karimzadeh F., Enayati M.H., Heidarpour A. Bulk Al-Zn/Al2O3 nanocomposite prepared by reactive milling and hot pressing methods. J. Alloys Compd. 2009. Vol. 475. P. 198—201.Umbrajkar S.M., Seshadri S., Schoenitz M., Hoffmann V.K., Dreizin E.L. Aluminum-rich Al—MoO3 nanocomposite powders prepared by arrested reactive milling. J. Propuls. Power. 2008. Vol. 24. P. 192—189.Umbrajkar S.M., Seshadri S., Schoenitz M., Hoffmann V.K., Dreizin E.L. Aluminum-rich Al—MoO3 nanocomposite powders prepared by arrested reactive milling. J. Propuls. Power. 2008. Vol. 24. P. 192—189.Firestein K.L., Corthay S., Steinman A.E., Matveev A.T., Kovalskii A.M., Sukhorukova I.V., Golbergb D., Shtansky D.V. High-strength aluminum-based composites reinforced with BN, AlB2 and AlN particles fabricated via reactive spark plasma sintering of Al—BN powder mixtures. Mater. Sci. Eng. A. 2017. Vol. 681. P. 1—9.Firestein K.L., Corthay S., Steinman A.E., Matveev A.T., Kovalskii A.M., Sukhorukova I.V., Golbergb D., Shtansky D.V. High-strength aluminum-based composites reinforced with BN, AlB2 and AlN particles fabricated via reactive spark plasma sintering of Al—BN powder mixtures. Mater. Sci. Eng. A. 2017. Vol. 681. P. 1—9.Firestein K.L., Steinman A.E., Golovin I.S., Cifre J., Obraztsova E.A., Matveev A.T., Kovalskii A.M., Lebedev O.I., Shtansky D.V., Golberg D. Fabrication, characterization, and mechanical properties of spark plasma sintered Al—BN nanoparticle composites. Mater. Sci. Eng. A. 2015. Vol. 642. P. 104—112.Firestein K.L., Steinman A.E., Golovin I.S., Cifre J., Obraztsova E.A., Matveev A.T., Kovalskii A.M., Lebedev O.I., Shtansky D.V., Golberg D. Fabrication, characterization, and mechanical properties of spark plasma sintered Al—BN nanoparticle composites. Mater. Sci. Eng. A. 2015. Vol. 642. P. 104—112.Liu Z.Y., Zhao K., Xiao B.L., Wang W.G., Ma Z.Y. Fabrication of CNT/Al composites with low damage to CNTs by a novel solution-assisted wet mixing combined with powder metallurgy processing. Mater. Des. 2016. Vol. 97. P. 424—430.Liu Z.Y., Zhao K., Xiao B.L., Wang W.G., Ma Z.Y. Fabrication of CNT/Al composites with low damage to CNTs by a novel solution-assisted wet mixing combined with powder metallurgy processing. Mater. Des. 2016. Vol. 97. P. 424—430.Gao Q., Wu S., Lü S., Duan X., An P. Preparation of in-situ 5 vol.% TiB2 particulate reinforced Al—4.5Cu alloy matrix composites assisted by improved mechanical stirring process. Mater. Des. 2016. Vol. 94. P. 79—86.Gao Q., Wu S., Lü S., Duan X., An P. Preparation of in-situ 5 vol.% TiB2 particulate reinforced Al—4.5Cu alloy matrix composites assisted by improved mechanical stirring process. Mater. Des. 2016. Vol. 94. P. 79—86.Zhou Y., Wang H. An Al/Al2O3/SiO2/polyimide composite with multilayer coating structure fillers based on self-passivated aluminum cores. Appl. Phys. Lett. 2013. Vol. 102. P. 132901.Zhou Y., Wang H. An Al/Al2O3/SiO2/polyimide composite with multilayer coating structure fillers based on self-passivated aluminum cores. Appl. Phys. Lett. 2013. Vol. 102. P. 132901.Zhang L., Xu H., Wang Z., Li Q., Wu J. Mechanical properties and corrosion behavior of Al/SiC composites. J. Alloys Compd. 2016. Vol. 678. P. 23—30.Zhang L., Xu H., Wang Z., Li Q., Wu J. Mechanical properties and corrosion behavior of Al/SiC composites. J. Alloys Compd. 2016. Vol. 678. P. 23—30.Kongshaug D.R., Ferguson J.B., Schultz B.F., Rohatgi P.K. Reactive stir mixing of Al—Mg/Al2O3np metal matrix nanocomposites: Effects of Mg and reinforcement concentration and method of reinforcement incorporation. J. Mater. Sci. 2014. Vol. 49. P. 2106—2116.Kongshaug D.R., Ferguson J.B., Schultz B.F., Rohatgi P.K. Reactive stir mixing of Al—Mg/Al2O3np metal matrix nanocomposites: Effects of Mg and reinforcement concentration and method of reinforcement incorporation. J. Mater. Sci. 2014. Vol. 49. P. 2106—2116.Kukuła-Kurzyniec A., Dutkiewicz J., Góral A., Coddet C., Dembinski L., Perrière L. Aluminium based composites strengthened with metallic amorphous phase or ceramic (Al2O3) particles. Mater. Des. 2014. Vol. 59. P. 246—251.Kukuła-Kurzyniec A., Dutkiewicz J., Góral A., Coddet C., Dembinski L., Perrière L. Aluminium based composites strengthened with metallic amorphous phase or ceramic (Al2O3) particles. Mater. Des. 2014. Vol. 59. P. 246—251.Ferguson J.B., Aguirre I., Lopez H., Schultz B.F., Cho K., Rohatgi P.K. Tensile properties of reactive stir-mixed and squeeze cast Al/CuOnp-based metal matrix nanocomposites. Mater. Sci. Eng. A. 2014. Vol. 611. P. 326—332.Ferguson J.B., Aguirre I., Lopez H., Schultz B.F., Cho K., Rohatgi P.K. Tensile properties of reactive stir-mixed and squeeze cast Al/CuOnp-based metal matrix nanocomposites. Mater. Sci. Eng. A. 2014. Vol. 611. P. 326—332.Steinman A.E., Corthay S., Firestein K.L., Kvashnin D.G., Kovalskii A.M., Matveev A.T., Sorokin P.B., Golberg D.V., Shtansky D.V. Al-based composites reinforced with AlB2, AlN and BN phases: Experimental and theoretical studies. Mater. Des. 2018. Vol. 141. P. 88—98.Steinman A.E., Corthay S., Firestein K.L., Kvashnin D.G., Kovalskii A.M., Matveev A.T., Sorokin P.B., Golberg D.V., Shtansky D.V. Al-based composites reinforced with AlB2, AlN and BN phases: Experimental and theoretical studies. Mater. Des. 2018. Vol. 141. P. 88—98.Yuan L., Han J., Liu J., Jiang Z. Mechanical properties and tribological behavior of aluminum matrix composites reinforced with in-situ AlB2 particles. Tribol. Int. 2016. Vol. 98. P. 41—47.Yuan L., Han J., Liu J., Jiang Z. Mechanical properties and tribological behavior of aluminum matrix composites reinforced with in-situ AlB2 particles. Tribol. Int. 2016. Vol. 98. P. 41—47.Yamaguchi M., Bernhardt J., Faerstein K., Shtansky D., Bandoa Y., Golovin I.S., Sinning H.-R., Golberg D. Fabrication and characteristics of melt-spun Al ribbons reinforced with nano/micro-BN phases. Acta Mater. 2013. Vol. 61. P. 7604—7615.Yamaguchi M., Bernhardt J., Faerstein K., Shtansky D., Bandoa Y., Golovin I.S., Sinning H.-R., Golberg D. Fabrication and characteristics of melt-spun Al ribbons reinforced with nano/micro-BN phases. Acta Mater. 2013. Vol. 61. P. 7604—7615.Choi H.J., Kwon G.B., Lee G.Y., Bae D.H. Reinforcement with carbon nanotubes in aluminum matrix composites. Scr. Mater. 2008. Vol. 59. P. 360—363.Choi H.J., Kwon G.B., Lee G.Y., Bae D.H. Reinforcement with carbon nanotubes in aluminum matrix composites. Scr. Mater. 2008. Vol. 59. P. 360—363.Singhal S., Srivastava A., Pasricha R., Mathur R. Fabrication of Al-matrix composites reinforced with amino functionalized boron nitride nanotubes. J. Nanosci. Nanotechnol. 2011. Vol. 11. P. 5179—5186.Singhal S., Srivastava A., Pasricha R., Mathur R. Fabrication of Al-matrix composites reinforced with amino functionalized boron nitride nanotubes. J. Nanosci. Nanotechnol. 2011. Vol. 11. P. 5179—5186.Ferguson J.B., Lopez H.F., Rohatgi P.K., Cho K., Kim C.S. Impact of volume fraction and size of reinforcement particles on the grain size in metal-matrix micro and nanocomposites. Metall. Mater. Trans. A. 2014. Vol. 45. P. 4055—4061.Ferguson J.B., Lopez H.F., Rohatgi P.K., Cho K., Kim C.S. Impact of volume fraction and size of reinforcement particles on the grain size in metal-matrix micro and nanocomposites. Metall. Mater. Trans. A. 2014. Vol. 45. P. 4055—4061.Lee K.B., Sim H.S., Heo S.W., Yoo H.R., Cho S.Y., Kwon H. Tensile properties and microstructures of Al composite reinforced with BN particles. Compos. A. 2002. Vol. 33. P. 709—715.Lee K.B., Sim H.S., Heo S.W., Yoo H.R., Cho S.Y., Kwon H. Tensile properties and microstructures of Al composite reinforced with BN particles. Compos. A. 2002. Vol. 33. P. 709—715.Ma X., Zhao Y.F., Tian W.J., Qian Z., Chen H.W., Wu Y.Y., Liu X.F. A novel Al matrix composite reinforced by nano-AlN p network. Sci. Rep. 2016. Vol. 6. P. 1—8.Ma X., Zhao Y.F., Tian W.J., Qian Z., Chen H.W., Wu Y.Y., Liu X.F. A novel Al matrix composite reinforced by nano-AlN p network. Sci. Rep. 2016. Vol. 6. P. 1—8.Sun Y., Zhang C., Liu B., Meng Q., Ma S., Dai W. Reduced graphene oxide reinforced 7075 Al matrix composites: Powder synthesis and mechanical properties. Metals. 2017. Vol. 7. P. 499.Sun Y., Zhang C., Liu B., Meng Q., Ma S., Dai W. Reduced graphene oxide reinforced 7075 Al matrix composites: Powder synthesis and mechanical properties. Metals. 2017. Vol. 7. P. 499.Sadeghian Z., Lotfi B., Enayati M.H., Beiss P. Microstructural and mechanical evaluation of Al—TiB2 nanostructured composite fabricated by mechanical alloying. J. Alloys Compd. 2011. Vol. 509. P. 7758—7763.Sadeghian Z., Lotfi B., Enayati M.H., Beiss P. Microstructural and mechanical evaluation of Al—TiB2 nanostructured composite fabricated by mechanical alloying. J. Alloys Compd. 2011. Vol. 509. P. 7758—7763.Kurita H., Kwon H., Estili M., Kawasaki A. Multi-walled carbon nanotube-aluminum matrix composites prepared by combination of hetero-agglomeration method, spark plasma sintering and hot extrusion. Mater. Trans. 2011. Vol. 52. P. 1960—1965.Kurita H., Kwon H., Estili M., Kawasaki A. Multi-walled carbon nanotube-aluminum matrix composites prepared by combination of hetero-agglomeration method, spark plasma sintering and hot extrusion. Mater. Trans. 2011. Vol. 52. P. 1960—1965.Bodunrin M.O., Alaneme K.K., Chown L.H. Aluminium matrix hybrid composites: A review of reinforcement philosophies; Mechanical, corrosion and tribological characteristics. J. Mater. Res. Technol. 2015. Vol. 4. P. 434—445.Bodunrin M.O., Alaneme K.K., Chown L.H. Aluminium matrix hybrid composites: A review of reinforcement philosophies; Mechanical, corrosion and tribological characteristics. J. Mater. Res. Technol. 2015. Vol. 4. P. 434—445.Zhang W.W., Hu Y., Wang Z., Yang C., Zhang G.Q., Prashanth K.G., Suryanarayana C. A novel high-strength Albased nanocomposite reinforced with Ti-based metallic glass nanoparticles produced by powder metallurgy. Mater. Sci. Eng. A. 2018. Vol. 734. P. 34—41.Zhang W.W., Hu Y., Wang Z., Yang C., Zhang G.Q., Prashanth K.G., Suryanarayana C. A novel high-strength Albased nanocomposite reinforced with Ti-based metallic glass nanoparticles produced by powder metallurgy. Mater. Sci. Eng. A. 2018. Vol. 734. P. 34—41.Zhang Z., Topping T., Li Y., Vogt R., Zhou Y., Haines C., Paras J., Kapoor D., Schoenunga J.M., Lavernia E.J. Mechanical behavior of ultrafine-grained Al composites reinforced with B4C nanoparticles. Scr. Mater. 2011. Vol. 65. P. 652—655.Zhang Z., Topping T., Li Y., Vogt R., Zhou Y., Haines C., Paras J., Kapoor D., Schoenunga J.M., Lavernia E.J. Mechanical behavior of ultrafine-grained Al composites reinforced with B4C nanoparticles. Scr. Mater. 2011. Vol. 65. P. 652—655.Mobasherpour I., Tofigh A.A., Ebrahimi M. Effect of nano-size Al2O3 reinforcement on the mechanical behavior of synthesis 7075 aluminum alloy composites by mechanical alloying. Mater. Chem. Phys. 2013. Vol. 138. P. 535—541.Mobasherpour I., Tofigh A.A., Ebrahimi M. Effect of nano-size Al2O3 reinforcement on the mechanical behavior of synthesis 7075 aluminum alloy composites by mechanical alloying. Mater. Chem. Phys. 2013. Vol. 138. P. 535—541.Poovazhagan L., Kalaichelvan K., Rajadurai A., Senthilvelan V. Characterization of hybrid silicon carbide and boron carbide nanoparticles-reinforced aluminum alloy composites. Procedia Eng. 2013. Vol. 64. P. 681—689.Poovazhagan L., Kalaichelvan K., Rajadurai A., Senthilvelan V. Characterization of hybrid silicon carbide and boron carbide nanoparticles-reinforced aluminum alloy composites. Procedia Eng. 2013. Vol. 64. P. 681—689.Pramanik A., Basak A.K., Dong Y., Shankar S., Littlefair G. Milling of nanoparticles reinforced Al-based metal matrix composites. J. Compos. Sci. 2018. Vol. 2. P. 13.Pramanik A., Basak A.K., Dong Y., Shankar S., Littlefair G. Milling of nanoparticles reinforced Al-based metal matrix composites. J. Compos. Sci. 2018. Vol. 2. P. 13.Semenic T., Hu J., Kraemer S., Housley R., Sudre O. High hardness cubic boron nitride with nanograin microstructure produced by high-energy milling. J. Am. Ceram. Soc. 2018. Vol. 101. P. 1—11.Semenic T., Hu J., Kraemer S., Housley R., Sudre O. High hardness cubic boron nitride with nanograin microstructure produced by high-energy milling. J. Am. Ceram. Soc. 2018. Vol. 101. P. 1—11.Guo B., Chen B., Zhang X., Cen X., Wang X., Song M., Ni S., Yi J., Shen T., Du Y. Exploring the size effects of Al4C3 on the mechanical properties and thermal behaviors of Al based composites reinforced by SiC and carbon nanotubes. Carbon. 2018. Vol. 135. P. 224—235.Guo B., Chen B., Zhang X., Cen X., Wang X., Song M., Ni S., Yi J., Shen T., Du Y. Exploring the size effects of Al4C3 on the mechanical properties and thermal behaviors of Al based composites reinforced by SiC and carbon nanotubes. Carbon. 2018. Vol. 135. P. 224—235.Kelly P.M. The effect of particle shape on dispersion hardening. Scr. Metall. 1972. Vol. 6. P. 647—656.Kelly P.M. The effect of particle shape on dispersion hardening. Scr. Metall. 1972. Vol. 6. P. 647—656.Krasheninnikov A.V., Berseneva N., Kvashnin D.G., Enkovaara J., Björkman T., Sorokin P., Shtansky D., Nieminen R.M., Golberg D. Toward stronger Al—BN nanotube composite materials: Insights into bonding at the Al/BN interface from first-principles calculations. J. Phys. Chem. C. 2014. Vol. 118. P. 26894—26901.Krasheninnikov A.V., Berseneva N., Kvashnin D.G., Enkovaara J., Björkman T., Sorokin P., Shtansky D., Nieminen R.M., Golberg D. Toward stronger Al—BN nanotube composite materials: Insights into bonding at the Al/BN interface from first-principles calculations. J. Phys. Chem. C. 2014. Vol. 118. P. 26894—26901.Kvashnin D.G., Ghorbani-Asl M., Shtansky D.V., Golberg D., Krasheninnikov A.V., Sorokin P.B. Mechanical properties and current-carrying capacity of Al reinforced with graphene/BN nanoribbons: a computational study. Nanoscale. 2016. Vol. 8. P. 20080—20089.Kvashnin D.G., Ghorbani-Asl M., Shtansky D.V., Golberg D., Krasheninnikov A.V., Sorokin P.B. Mechanical properties and current-carrying capacity of Al reinforced with graphene/BN nanoribbons: a computational study. Nanoscale. 2016. Vol. 8. P. 20080—20089.Kashyap K.T., Koppad P.G., Puneeth K.B., Aniruddha Ram H.R., Mallikarjuna H.M. Elastic modulus of multiwalled carbon nanotubes reinforced aluminium matrix nanocomposite — A theoretical approach. Comput. Mater. Sci. 2011. Vol. 50. P. 2493—2495.Kashyap K.T., Koppad P.G., Puneeth K.B., Aniruddha Ram H.R., Mallikarjuna H.M. Elastic modulus of multiwalled carbon nanotubes reinforced aluminium matrix nanocomposite — A theoretical approach. Comput. Mater. Sci. 2011. Vol. 50. P. 2493—2495.Silvestre N., Faria B., Canongia Lopes J.N. Compressive behavior of CNT-reinforced aluminum composites using molecular dynamics. Compos. Sci. Technol. 2014. Vol. 90. P. 16—24.Silvestre N., Faria B., Canongia Lopes J.N. Compressive behavior of CNT-reinforced aluminum composites using molecular dynamics. Compos. Sci. Technol. 2014. Vol. 90. P. 16—24.Hassanzadeh-Aghdam M.K., Mahmoodi M.J. A comprehensive analysis of mechanical characteristics of carbon nanotube-metal matrix nanocomposites. Mater. Sci. Eng. A. Vol. 701. P. 34—44.Hassanzadeh-Aghdam M.K., Mahmoodi M.J. A comprehensive analysis of mechanical characteristics of carbon nanotube-metal matrix nanocomposites. Mater. Sci. Eng. A. Vol. 701. P. 34—44.

The authors declare that there are no conflicts of interest present.