Methods for preparation and production of raw materials to make gadolinium oxide pellets used in composite uranium-gadolinium fuel production
https://doi.org/10.17073/1997-308X-2016-2-15-21
Abstract
А process for producing an effective composite uranium-gadolinium fuel was developed in the laboratory. This fuel will help to improve technical and economic performance of nuclear power plants. Based on the analysis of the results obtained, the implementation of the proposed method in a manufacturing environment was substantiated. Methods for preparation and production of the raw materials for the fabrication of gadolinium oxide were described. The essential characteristics of promising composite uraniumgadolinium fuel pills were defined experimentally. Based on these characteristics, the final specifications for the fuel pills were formulated.
About the Authors
T. M. Aldazharov
East Kazakhstan State Technical University
Kazakhstan
Kazakhstan
Doctoral Candidate of Department «Chemistry, metallurgy and enrichment»,
070004, Ust-Kamenogorsk, A.K. Protozanov str., 69
Yu. G. Rusin
East Kazakhstan State Technical University
Russian Federation
Cand. Sci. (Phys.-Math.), Senior Lecturer of Department «Chemistry, metallurgy and enrichment»,
Russian Federation
Cand. Sci. (Phys.-Math.), Senior Lecturer of Department «Chemistry, metallurgy and enrichment»,
070004, Ust-Kamenogorsk, A.K. Protozanov str., 69
Zh. V. Eremeeva
MISIS
Russian Federation
Russian Federation
Dr. Sci. (Tech.), Associate Professor of Department «Powder metallurgy and functional coatings»,
119049, Moscow, Leninsky pr., 4
T. A. Ryspaev
Technical University Clausthal
Germany
Germany
Dr. Sci. (Tech.), Senior Lecturer,
38678, Adolph-Roemer-Straße 2A, Clausthal-Zellerfeld
References
1. Kuchkovskij A.A., Manych A.A., Rusin Y.G., Karmanov B.A. Proizvodstvo toplivnyh tabletok s vygorajushhimi poglotiteljami [Production of fuel pellets with burnable absorbers]. In: Aktual’nye problemy uranovoi promyshlennosti [Reports of II Int. sci.-pract. conf. «Actual problems of uranium industry] (Almaty, 10—13 July 2002. Аlmaty: Bastau, 2003). P. 133—135.
2. Jeffrey R. Secker, Baard J. Johansen, David L. Stucker, Odelli Ozer, Kostadin Ivanov, Serkan Yilmaz, E.H. Young. Optimum Discharge Burn-up, Cycle Length for BWRs. Nucl. Technol. 2005. Vol. 151. No. 2. P. 109—119.
3. Gorskij V.V. Uran-gadolinievoe oksidnoe toplivo. Ch. 2. Teplofizicheskie svojstva UO2—Cd2O3 i metody ih izmerenija [Uranium-gadolinium oxide fuel. Pt. 2. Thermophysical properties of UO2—Cd2O3 and methods of their measurement]. Atomnaya tekhnika za rubezhom. 1989. No. 3. P. 5—15.
4. Hirai M., Ishimoto S. Thermal diffusivities and Thermal conductivities of UO2—Cd2O3. J. Nucl. Sci. Technol. 1991. Vol. 28. No. 11. P. 995—1000.
5. Bibilashvili, Yu.K., Kuleshov, A.V., Milovanov, O.V., Mikheev, E.N., Novikov, V.V., Popov, S.G., Proselkov, V.N., Pimenov, Yu.V., Godin, Yu.G. Investigation of Thermal-Physical and Mechanical Properties of Uranium-Gadolinium Oxide Fuel, Advanced fuel pellet materials and designs for water cooled reactors. Proceedings of a technical committee (Brussels, 20—24 Oct. 2003). IAEATECDOC-1416. 2003. P. 85—99.
6. Gregg R., Worral A. Effect of Highly Enriched/Highly Burnt UO2 Fuels on Fuel Cycle Costs, Radiotoxicity and Nuclear Design Parametrs. Nucl. Technol. 2005. Vol. 151. P. 126—132.
7. Al’davahra S., Savander V.I., Belousov. N.I. Metodika rascheta i analiz primenenija granulirovannyh poglotitelej v VVER [The method of calculation and analysis of the application of granular absorbers in WWER]. Atomnaya energiya. 2006. No. 1. P. 8—13.
8. Poljakov A.A., Stogov Ju.V., Savander V.I., Belousov N.I., Proselkov V.N. Izuchenie fiziki legkovodnyh reshetok s uran-gadolinievym toplivom, soderzhashhim Gd2O3 granuly [Study of the physics of light-water lattices with uranium-gadolinium fuel containing Gd2O3 granules]. In: Scientific session of MIPhI-2000. Pt. 8. Molecular-selective and non-linear phenomena and processes. Physico-technical problems of nuclear power. Ultrafine (nano) materials. P. 90—91.
9. Klemens P.G. Effect of crystal lattice defects on thermal conductivity. Phys. Rev. 1960. Vol. 119. P. 507.
10. Ohmichi T., Fukushima S., Maeda A. Watanabe H. Effect of Gd2O3 dope on UO2 thermal conductivity. J. Nucl. Mater. 1981. Vol. 102. P. 40—46.
11. Kingeri U.D. Vvedenie v keramiku [Introduction to ceramics]. Moscow: Strojizdat, 1967. P. 326.
12. Gorskij V.V. Uran-gadolinievoe oksidnoe toplivo. Ch.1. Osnovnye svojstva Gd2O3 i UO2—Cd2O3 [Uranium-gadolinium oxide fuel. Pt. 1. Basic properties of Gd2O3 and UO2—Cd2O3]. Atomnaya tekhnika za rubezhom. 1989. No. 2. Р. 3—10.
13. Yuda R., Une K. Effect of sintering atmosphere on the densification of UO2—Cd2O3 compacts. J. Nucl. Vat. 1991. Vol. 178. P. 195—203.
14. Boccaccini A.R. Glass and glass-ceramic matrix composite materials. J. Ceram. Soc. Japan. 2001. Vol. 109. No 7. P. 99—109.
15. Dement’ev B.A. Jadernye jenergeticheskie reaktory [Nuclear power reactors]. Moscow: Energoatomizdat, 1990.
Review
For citations:
Aldazharov T.M., Rusin Yu.G., Eremeeva Zh.V., Ryspaev T.A. Methods for preparation and production of raw materials to make gadolinium oxide pellets used in composite uranium-gadolinium fuel production. Powder Metallurgy аnd Functional Coatings (Izvestiya Vuzov. Poroshkovaya Metallurgiya i Funktsional'nye Pokrytiya). 2016;(2):15-21. (In Russ.) https://doi.org/10.17073/1997-308X-2016-2-15-21
Views:
1024
Email this article 