Development of a polyoxymethylene-based feedstock for metal injection molding using 09Cr16Ni4Nb stainless steel powder | Parkhomenko | Powder Metallurgy аnd Functional Coatings (Izvestiya Vuzov. Poroshkovaya Metallurgiya i Funktsional'nye Pokrytiya)

Powder Metallurgy аnd Functional Coatings (Izvestiya Vuzov. Poroshkovaya Metallurgiya i Funktsional'nye Pokrytiya)

ISSN 1997-308X (Print)
ISSN 2412-8767 (Online)

eng | рус

Preview

Powder Metallurgy аnd Functional Coatings (Izvestiya Vuzov. Poroshkovaya Metallurgiya i Funktsional'nye Pokrytiya)

Advanced search

Archives

Download this PDF file

For citations:

Parkhomenko A.V., Amosov A.P., Pastukhov A.M. Development of a polyoxymethylene-based feedstock for metal injection molding using 09Cr16Ni4Nb stainless steel powder. Powder Metallurgy аnd Functional Coatings (Izvestiya Vuzov. Poroshkovaya Metallurgiya i Funktsional'nye Pokrytiya). 2025;19(3):15-24. https://doi.org/10.17073/1997-308X-2025-3-15-24

Creative Commons License

This work is licensed under a Attribution-NonCommercial-NoDerivatives 4.0 International.

ISSN 1997-308X (Print)
ISSN 2412-8767 (Online)

* not an advertisement

Indexing Databases

* not an advertisement

Popular articles

Editor-in-Chief

Article Tools

Finding References

Email this article (Login required)

Email the author (Login required)

About the Authors

A. V. Parkhomenko
Samara State Technical University
Russian Federation

Andrei V. Parkhomenko – Graduate Student of the Department of Metallurgy, Powder Metallurgy, Nanomaterials (MPMN)

244 Molodogvardeiskaya Str., Samara 443100, Russia

A. P. Amosov
Samara State Technical University
Russian Federation

Aleksandr P. Amosov – Dr. Sci. (Phys.-Math.), Professor, Head of the Department of MPMN

244 Molodogvardeiskaya Str., Samara 443100, Russia

A. M. Pastukhov
Penza State University
Russian Federation

Alexandr M. Pastukhov – Graduate Student of the Department of Information and Measuring Equipment and Metrology

40 Krasnaya Str., Penza 440026, Russia

Notifications