Mechanical properties and oxidation resistance of hafnium carbonitride hot pressed ceramics

In this study, ceramic hafnium carbonitride samples were obtained, consolidated by hot pressing commercial hafnium carbide and nitride powders. Consolidation was performed at a temperature of 2000 °C, a pressure of 40 MPa, and a holding time of 15 min. The mechanical properties of the materials were determined during the study. It was found that during the formation of hafnium carbonitride, increasing the stoichiometric C:N ratio from 20:80 to 80:20 increases the hardness from 17.7 to 22.9 GPa, Young’s modulus from 452 to 479 GPa, and strength from 622 to 694 MPa. In turn, increasing the nitrogen content increases the crack resistance of the material. A study of the oxidation resistance of materials exposed to high temperatures of 1200 °C revealed that hafnium carbonitride samples exhibited increased oxidation resistance compared to hafnium carbide and hafnium nitride samples. As the carbon content in the carbonitride increased, the oxidation rate decreased. Upon heating, parabolic oxidation kinetics were observed. After oxidative exposure, a dense, highly adhesive oxide layer formed on the surface of the samples.

1. Wyatt B.C., Nemani S.K., Hilmas G.E., Opila E.J., Anasori B. Ultra-high temperature ceramics for extreme environments. Nature Reviews Materials. 2024;9(11):773–789. https://doi.org/10.1038/s41578-023-00619-0

2. Filipović S., Fahrenholtz W.G., Hilmas G.E., Obradović N., Curtarolo S. Synergystic properties of dual phase (Hf, Ti, Zr)B2–(Hf, Ti, Zr)C ceramics. Journal of the European Ceramic Society. 2025;45(12):117448. https://doi.org/10.1016/j.jeurceramsoc.2025.117448

3. Wang X., Ni D., Qin Y., Chen B., Cai F., Hu Y., Dong S. Ablation behavior and mechanisms of TaxHf1–xC–SiC ceramics fabricated by reactive hot-pressing: Effect of Ta:Hf ratio. Ceramics International. 2025;51(26):48588–48596. https://doi.org/10.1016/j.ceramint.2025.08.110

4. Ni D., Cheng Y., Zhang J., Liu J.X., Zou J., Chen B. Advances in ultra-high temperature ceramics, composites, and coatings. Journal of Advanced Ceramics. 2021;11(1): 1–56. https://doi.org/10.1007/s40145-021-0550-6

5. Fahrenholtz W.G., Hilmas G.E. Ultra-high temperature ceramics: materials for extreme environments. Scripta Materialia. 2017;129:94–99. https://doi.org/10.1016/j.scriptamat.2016.10.018

6. Suvorova V.S., Nepapushev A.A., Suvorov D.S., Kuskov K.V., Moskovskikh D.O. Self-propagating high-temperature synthesis and spark plasma sintering of high-entropy (Hf,Ta,Nb)(C,N) carbonitride. Powder Metallurgy аnd Functional Coatings. 2024;18(3):38–48. https://doi.org/10.17073/1997-308X-2024-3-38-48

7. Kuzmenko E., Matrenin S., Nassyrbayev A. Oxidation behavior and physico-mechanical properties of spark plasma sintered ZrCN–ZrO2 ceramics. Ceramics International. 2025;51(28):56792–56803. https://doi.org/10.1016/j.ceramint.2025.09.393

8. Mukasyan A.S., Rogachev A.S. Combustion synthesis of ultra‐high temperature ceramics. International Journal of Applied Ceramic Technology. 2025;22(6):e70044. https://doi.org/10.1111/ijac.70044

9. Fahrenholtz W.G., Hilmas G.E., Talmy I.G., Zaykoski J.A. Refractory diborides of zirconium and hafnium. Journal of the American Ceramic Society. 2007;90(5):1347–1364. https://doi.org/10.1111/j.1551-2916.2007.01583.x

10. Fahrenholtz W.G., Hilmas G.E. Oxidation of ultra-high temperature transition metal diboride ceramics. International Materials Reviews. 2013;57(1):61–72. https://doi.org/10.1179/1743280411Y.0000000012

11. Lengauer W. Transition metal carbides, nitrides, and carbonitrides. Wiley Online Library, 2000. https://doi.org/10.1002/9783527618217.ch7

12. Binner J., Porter M., Baker B., Zou J., Venkatachalam V., Diaz V.R. Selection, processing, properties and applications of ultra-high temperature ceramic matrix composites, UHTCMCs – A review. International Materials Reviews. 2020;65(7):389–444. https://doi.org/10.1080/09506608.2019.1652006

13. Opeka M.M., Talmy I.G., Wuchina E.J., Zaykoski J.A., Causey S.J. Mechanical, thermal, and oxidation properties of refractory hafnium and zirconium compounds. Journal of the European Ceramic Society. 1999;19(13):2405–2414. https://doi.org/10.1016/S0955-2219(99)00129-6

14. Sheindlin M., Falyakhov T., Petukhov S., Valyano G., Vasin A. Recent advances in the study of high-temperature behaviour of non-stoichiometric TaCx , HfCx and ZrCx carbides in the domain of their congruent melting point. Advances in Applied Ceramics. 2018;117(1):48–55. https://doi.org/10.1080/17436753.2018.1510819

15. Feng L., Lee S.H., Wang H.L., Lee H.S. Nanostructured HfC–SiC composites prepared by high-energy ball-milling and reactive spark plasma sintering. Journal of the European Ceramic Society. 2016;36(1):235–238. https://doi.org/10.1016/j.jeurceramsoc.2015.09.024

16. Hong Q.J., Van De Walle A. Prediction of the material with highest known melting point fromab initiomolecular dynamics calculations. Physical Review B. 2015;92(2): 020104. https://doi.org/10.1103/PhysRevB.92.020104

17. Zavjalov A.P., Nikiforov P.A., Kosyanov D.Y., Zakharenko A.M., Trukhin V.O., Talskikh K.Y. Phase formation and densification peculiarities of Hf–C–N solid solution ceramics during reactive SPS. Advanced Engineering Materials. 2020;22(12):2000482. https://doi.org/10.1002/adem.202000482

18. Buinevich V.S., Nepapushev A.A., Moskovskikh D.O., Trusov G.V., Kuskov K.V., Vadchenko S.G. Fabrication of ultra-hightemperature nonstoichiometric hafnium carbonitride via combustion synthesis and spark plasma sintering. Ceramics International. 2020;46(10):16068–16073. https://doi.org/10.1016/j.ceramint.2020.03.158

19. Che T., Mao H.R., Guo R.F., Shen P. Ultrafast synthesis and pressureless densification of multicomponent nitride and carbonitride ceramics. Ceramics International. 2023;49(19):31530–31538. https://doi.org/10.1016/j.ceramint.2023.07.104

20. Peng Z., Sun W., Xiong X., Xu Y., Zhou Z., Zhan Z., Zeng Y. Novel nitrogen-doped hafnium carbides for advanced ablation resistance up to 3273 K. Corrosion Science. 2021;189:109623. https://doi.org/10.1016/j.corsci.2021.109623

21. Harrison R.W., Lee W.E. Processing and properties of ZrC, ZrN and ZrCN ceramics: A review. Advances in Applied Ceramics. 2016;115:294–307. https://doi.org/10.1179/1743676115Y.0000000061

22. Suvorova V., Khadyrova I., Nepapushev A., Kuskov K., Suvorov D., Moskovskikh D. Fabrication and investigation of novel hafnium-zirconium carbonitride ultra-high temperature ceramics. Ceramics International. 2023;49:23809–23816. https://doi.org/10.1016/j.ceramint.2023.04.222

23. Zhang X., Li X., Zuo J., Luo R., Wang J., Qian Y., Xu J. Characterization of thermophysical and mechanical properties of hafnium carbonitride fabricated by hot pressing sintering. Journal of Materials Research and Technology. 2023;23:4432–4443. https://doi.org/10.1016/j.jmrt.2023.02.099

24. Ushakov S.V., Navrotsky A., Hong Q.J., Van De Walle A. Carbides and nitrides of zirconium and hafnium. Materials. 2019;12(17):2728. https://doi.org/10.3390/ma12172728

25. Magomedov M.N. On deviations from Vegard’s law at increasing pressure in alloys. Inorganic Materials. 2020;56(9): 953–958. https://doi.org/10.1134/S0020168520090125

26. Buinevich V.S., Nepapushev A.A., Moskovskikh D.O., Kuskov K.V., Yudin S.N., Mukasyan A.S. Ultra-high-temperature tantalum-hafnium carbonitride ceramics fabricated by combustion synthesis and spark plasma sintering. Ceramics International. 2021;47(21): 30043–30050. https://doi.org/10.1016/j.ceramint.2021.07.180