Investigation of copper powder cementation deposition process
https://doi.org/10.17073/1997-308X-2013-2-3-7
Abstract
Copper cementation in dispersed form from sulphate solutions has been carried out by metallographic, polarization, weight, and volumetric methods. The mass balance of the cementation process is determined. The effect of chloride ions on the copper deposit shape is shown. Polarization measure- ments of the electrode processes of the aluminum-copper couple are performed. The full two-factor experiment has been carried out, which results in regression equations showing average particle size, bulk density, and deposition rate of copper powder depending on the cementation reaction conditions.
Keywords
About the Authors
V. V. ArtamonovRussian Federation
V. P. Artamonov
E. Yu. Perekopnaya
A. A. Abishev
M. M. Suyundikov
P. O. Bykov
References
1. Стендер В. В. Прикладная электрохимия. Харьков: ХГУ, 1961. 2. Баймаков Ю. В., Журин А. Н. Электролиз в гидрометаллургии. М.: Металлургиздат, 1963.
2. Алкацев М. И. Процессы цементации в цветной металлургии. М.: Металлургия, 1981.
3. Артамонов В. П., Помосов А. В. // Изв. вузов. Цв. металлургия. 1976. No 2. С. 41.
4. Артамонов В. П., Помосов А. В. // Там же. No 3. С. 30.
5. Артамонов В. П., Помосов А. В. // Порошк. металлургия. 1976. No 4. С. 1.
6. Артамонов В. П., Помосов А. В. // Электрохимия. 1984. Т. 20, No 12. С. 1649.
7. Артамонов В. П., Помосов А. В. // Порошк. металлургия. 1987. No 1. С. 5.
8. ГОСТ 18318-94. Порошки металлические. Определение размера частиц сухим просеиванием.
9. ГОСТ 19440-94. Порошки металлические. Определение насыпной плотности.
10. Кипарисов С. С., Либенсон Г. А. Порошковая металлургия. М.: Металлургия, 1980.
11. Адлер Ю. П., Маркова Е. В., Грановский Ю. В. Планирование эксперимента при поиске оптимальных условий. М.: Наука, 1976.
Review
For citations:
Artamonov V.V., Artamonov V.P., Perekopnaya E.Yu., Abishev A.A., Suyundikov M.M., Bykov P.O. Investigation of copper powder cementation deposition process. Powder Metallurgy аnd Functional Coatings (Izvestiya Vuzov. Poroshkovaya Metallurgiya i Funktsional'nye Pokrytiya). 2013;(2):3-7. (In Russ.) https://doi.org/10.17073/1997-308X-2013-2-3-7