Reaction synthesis of Ti2AlN MAX-phase
https://doi.org/10.17073/1997-308X-2016-2-41-46
Abstract
Ti2AlN MAX-phase was synthesized from the powder mixtures of Ti–AlN using the reactionary sintering method. The optimal synthesis mode for the compound containing less than 1 % of TiN impurity phase was determined: isothermal annealing at 1300 °C for 2 hours in argon at a pressure of 3 atm. The preliminary mechanical activation and the reaction synthesis environment were investigated as the factors that can influence the yield of the Ti2AlN phase. It is shown that the activation increases the level of TiN secondary phase. It was also found that the vacuum synthesis does not enable obtaining of single-phase Ti2AlN.
About the Authors
D. Yu. Kovalev
Institute of Structural Macrokinetics and Materials Science RAS (ISMAN)
Russian Federation
Russian Federation
PhD, Head of X-Ray Investigation laboratory,
142432, Moscow region, Chernogolovka, Academician Osipyan str., 8
M. A. Luginina
Institute of Structural Macrokinetics and Materials Science RAS (ISMAN)
Russian Federation
Postgraduate of ISMAN
Russian Federation
Postgraduate of ISMAN
A. E. Sytschev
Institute of Structural Macrokinetics and Materials Science RAS (ISMAN)
Russian Federation
PhD, Head of Laboratory physical materials science of ISMAN
Russian Federation
PhD, Head of Laboratory physical materials science of ISMAN
References
1. Barsoum M.W. MAX Phases: Properties of Machinable Ternary Carbides and Nitrides: First Edition. Wiley-VCH Verlag GmbH & Co., 2013.
2. Jeitschko W., Nowotny H., Benesovsky F. Ti2AlN, Eine Stickstoffhaltige H-Phase. Monatsh. Chem. 1963. Vol. 94. P. 1198.
3. Barsoum M.W. The Mn+1AXn phases: A new class of solids, thermodynamically stable nanolaminates. Progr. Solid State Chemistry. 2000. Vol. 28. No. 1. P. 201—281.
4. Radovic M., Barsoum M.W. MAX phases: Bridging the gap between metals and ceramics. Amer. Ceram. Soc. Bull. 2013. Vol. 92. No. 3. P. 20—27.
5. Scabarozi T., Ganguly A., Hettinger J.D., Lofland S.E., Amini S., Finkel P., El-Raghy T., Barsoum M.W. Electronic and thermal properties of Ti3Al(C0.5,N0.5)2, Ti2Al(C0.5N0.5) and Ti2AlN. J. Appl. Phys. 2008. Vol. 104. No. 7. P. 073713— 073716.
6. Barsoum M.W., Ali M., El-Raghy T. Processing and Characterization of Ti2AlC, Ti2AlN, Ti2AlC0.5N0.5. Metal. Mater. Trans. A. 2000. Vol. 31A. No. 7. P. 1857—1865.
7. Yan M., Chen Y., Mei B., Zhu J. Synthesis of high-purity Ti2AlN ceramic by hot pressing. Trans. Nonferr. Met. Soc. Chine. 2008. Vol. 18. No. 1. P. 82—85.
8. Liu Yi, Zhang L., Xiao W., Zhang L., Pu Yon., Guo Sh. Rapid synthesis of Ti2AlN ceramic via thermal explosion. Mater. Lett. 2015. Vol. 149. P. 5—7.
9. Kolesnikov S.I., Kondakov A.A., Miloserdov P.A., Novickij I.M., Bardin M.A. Opredelenie optimal’nykh uslovii sinteza v troinoi sisteme Ti—Al—N dlya polucheniya produktov, soderzhashchikh naibol’shee kolichestvo MAX-faz [Determination of the optimum conditions of synthesis in a triple system of Ti—Al—N for products containing the highest number of MAX-phases]. Bashkirskii Khimicheskii Zhurnal. 2012. Vol. 19. No. 4. P. 162—165.
10. Yan M., Mei B., Zhu J., Tian C., Wang P. Synthesis of high-purity bulk Ti2AlN by spark plasma sintering (SPS). Ceram. Int. 2008. Vol. 34. No. 6. P. 1439—1442.
11. Yi Liu, Shi Zh., Wang J., Qiao G., Jin Zh., Shen Zh. Reactive consolidation of layered-ternary Ti2AlN ceramics by spark plasma sintering of a Ti/AlN powder mixture. J. Europ. Ceram. Soc. 2011. Vol. 31. No. 5. P. 863—868.
12. Schuster J., Bauer J. The ternary system titanium—aluminum—nitrogen. J. Solid State Chem. 1984. Vol. 53. No. 2. P. 260—265.
13. Fan Z., Newman N. Experimental determination of the rates of decomposition and cation desorbtion from AlN surface. Mater. Sci. Eng. B. 2001. Vol. 87. No. 3. P. 244— 248.
14. Gurvich L.V., Veits I.V., Medvedev V.F. et al. Termodinamicheskie svoistva individualnykh veshchestv [Thermodynamic properties of individual substances]. Мoscow: Nauka, 1981.
15. Vadchenko S.G., Sytschev A.E., Kovalev D.Yu., Shchukin A.S., Belikova A.F. SHS of MAX Compounds in the Ti—Si—C System: Influence of Mechanical Activation. Int. J. Self-Prop. High-Temp. Synth. 2014. Vol. 23. No. 3. P. 141—144.
Review
For citations:
Kovalev D.Yu., Luginina M.A., Sytschev A.E. Reaction synthesis of Ti2AlN MAX-phase. Powder Metallurgy аnd Functional Coatings (Izvestiya Vuzov. Poroshkovaya Metallurgiya i Funktsional'nye Pokrytiya). 2016;(2):41-46. (In Russ.) https://doi.org/10.17073/1997-308X-2016-2-41-46
Views:
1011
Email this article 