Preview

Powder Metallurgy аnd Functional Coatings (Izvestiya Vuzov. Poroshkovaya Metallurgiya i Funktsional'nye Pokrytiya)

Advanced search

Regularities of contact interaction of double (Ti1–nMen)С carbides with nickel

https://doi.org/10.17073/1997-308X-2014-1-39-43

Abstract

The regularities of metallurgical reactions of IV-VI group transition metal alloyed titanium carbide with nickel melt are generalized. Interaction of dou- ble carbides with nickel is established to be characterized by primary dissolution of carbon and alloying metal in it. Accordingly the carbide phase composition varies. The efficiency of effect of alloying elements on titanium carbide dissolution rate in nickel depends on the atomic dimensional re- lationship of titanium and alloying metal. If RMe> RTi (Me = Zr, Hf ), the intensity of titanium carbide interaction with nickel increases; if RMe RTi (Me = V, Nb, Mo, W), then it decreases. In the first case the defining factor is the increase in elastic strain energy of the lattice; in the second case – the decrease of interphase energy of the carbide-melt interface. 

About the Authors

V. A. Zhilyaev
Институт химии твердого тела УрО РАН, 620990, г. Екатеринбург, ул. Первомайская, 91
Russian Federation


E. I. Patrakov
Институт физики металлов УрО РАН, 620990, г. Екатеринбург, ул. С. Ковалевской, 18
Russian Federation


References

1. Кипарисов С. С., Левинский Ю. В., Петров А. П. Карбид титана: получение, свойства, применение. М.: Металлургия, 1987.

2. Lengauer W., Eder A. Carbides: Transition metal solid-state chemistry. Encyclopedia of inorganic chemistry. Chichester: John Willey & Sons, 2005.

3. Durlu N. // J. Eur. Ceram. Soc. 1999. Vol. 19. P. 2415.

4. Bellosi A., Calzavarini R., Faga M.G. et al. // J. Mater. Proc. Technol. 2003. Vol. 143/144. P. 527.

5. Chun D. I., Kim D. Y., Eun K. Y. // J. Am. Ceram. Soc. 1993. Vol. 76, No 8. P. 2049.

6. Yanaba Y., Takahashi T., Hayashi K. A. // J. Jap. Soc. Powder and Powder Metall. 2004. Vol. 51, No 5. P. 374.

7. Moskowitz D., Plummer H. K. // Proc. Inter. Sci. Conf. on Hard Mater (N.Y. – London). 1983. P. 299.

8. Yoshimura H., Sugizawa T., Nishigaki K. et al. // Int. J. Refract. Met. Hard Mater. 1983. Vol. 2, No 4. P. 170.

9. Wally P., Binder S., Ettmayer P., Lengauer W. // J. Alloys Compd. 1995. Vol. 230, No 1. P. 53.

10. Жиляев В. А., Федоренко В. В. // Тугоплавкие соединения. Киев: ИПМ АН УССР, 1981. С. 51.

11. Жиляев В. А., Патраков Е. И. // Конструкции из композ. материалов. 2006. No 4. С. 199.

12. Жиляев В. А. // Материаловедение. 2012. No 3. С. 3.

13. Heuer A. H., Sears J. S., Zaluzec N. J. // Proc. 2-nd Inter. Conf. Sci. on Hard Mater. (Bristol, Boston, A Hilger Ltd.). 1986. P. 321.

14. Пинес Б. Я., Сидоренко А. Ф. // Журн. техн. физики. 1958.

15. Т. 28, No 8. С. 1748.


Review

For citations:


Zhilyaev V.A., Patrakov E.I. Regularities of contact interaction of double (Ti1–nMen)С carbides with nickel. Powder Metallurgy аnd Functional Coatings (Izvestiya Vuzov. Poroshkovaya Metallurgiya i Funktsional'nye Pokrytiya). 2014;(1):39-43. (In Russ.) https://doi.org/10.17073/1997-308X-2014-1-39-43

Views: 850


ISSN 1997-308X (Print)
ISSN 2412-8767 (Online)