Investigation of Tribological Properties of Pyrolysis Chromium Carbide Coatings
https://doi.org/10.17073/1997-308X-2014-2-50-54
Abstract
There were presented results of investigations of tribological properties of trial steel prototype with pyrolytic chromium carbide (CrC) with the use of up- grade friction machine SMT-1. There was demonstrated that application of such coatings on the steel 40X allows improve frictional properties of steel disc’s of hydromechanics transmission (HMT), that will be lead to increasing of its abrasion resistance, cutting time of mutual skid, decreasing of tem- perature in the contact of working surface of friction disc and decreasing of warp of disc’s risk, which leads to degradation of HMT operating capacity.
About the Authors
V. A. VasinRussian Federation
M. V. Prozhega
Russian Federation
O. V. Somov
Russian Federation
References
1. Трение, изнашивание и смазка: Справочник. В 2 кн. Кн. 2 / Под ред. И. В. Крагельского, В. В. Алисина. М.: Машиностроение, 1979.
2. Годжаев З. А., Зайцев С. Д., Сомов О. В., Шабалинская Л. А. // Тр. Междунар. науч.-техн. конф. «Динамика, надежность и долговечность механических и биохимических систем и элементов конструкций» (г. Севастополь, 6–10 сент. 2010 г.). Вестн. ЦНТУ. Вып. 110. С. 191–192.
3. Пат. 97731 (РФ). Композиционное покрытие для защиты стали от износа / В. А. Васин, Б. Л. Крит, О. В. Сомов. 2010.
4. Смирнов Н. И., Прожега М. В., Смирнов Н. Н. // Физика, химия и механика трибосистем: Межвуз. сб. науч. тр. 2006. Вып. 5. С. 56–59 (По матер. междунар. науч.- практ. сем. «Техника и технологии трибологических исследований», г. Иваново, 4–6 окт. 2006 г.).
5. Прожега М. В. // Трение и смазка в машинах и механизмах. 2011. No 6. С. 17–22.
Review
For citations:
Vasin V.A., Prozhega M.V., Somov O.V. Investigation of Tribological Properties of Pyrolysis Chromium Carbide Coatings. Powder Metallurgy аnd Functional Coatings (Izvestiya Vuzov. Poroshkovaya Metallurgiya i Funktsional'nye Pokrytiya). 2014;(2):50-54. (In Russ.) https://doi.org/10.17073/1997-308X-2014-2-50-54