Optimization of powder mixing parameters for the Al–Sn–Pb system for use in selective laser melting | Akimov | Powder Metallurgy аnd Functional Coatings (Izvestiya Vuzov. Poroshkovaya Metallurgiya i Funktsional'nye Pokrytiya)

Powder Metallurgy аnd Functional Coatings (Izvestiya Vuzov. Poroshkovaya Metallurgiya i Funktsional'nye Pokrytiya)

ISSN 1997-308X (Print)
ISSN 2412-8767 (Online)

eng | рус

Preview

Powder Metallurgy аnd Functional Coatings (Izvestiya Vuzov. Poroshkovaya Metallurgiya i Funktsional'nye Pokrytiya)

Advanced search

Archives

Download this PDF file

For citations:

Akimov K.O., Skorentsev A.L., Rusin N.M., Likharev V.E., Nikonov A.Yu., Dmitriev A.I. Optimization of powder mixing parameters for the Al–Sn–Pb system for use in selective laser melting. Powder Metallurgy аnd Functional Coatings (Izvestiya Vuzov. Poroshkovaya Metallurgiya i Funktsional'nye Pokrytiya). 2025;19(2):15-23. https://doi.org/10.17073/1997-308X-2025-2-15-23

Creative Commons License

This work is licensed under a Attribution-NonCommercial-NoDerivatives 4.0 International.

ISSN 1997-308X (Print)
ISSN 2412-8767 (Online)

* not an advertisement

Indexing Databases

* not an advertisement

Popular articles

Editor-in-Chief

Article Tools

Finding References

Email this article (Login required)

Email the author (Login required)

About the Authors

K. O. Akimov
Institute of Strength Physics and Materials Science of the Siberian Branch of the Russian Academy of Sciences
Russian Federation

Kirill O. Akimov – Cand. Sci. (Eng.), Research Associate of the Laboratory of Powder Materials Consolidation Physics

2/4 Akademichesky Prosp., Tomsk 634055, Russia

A. L. Skorentsev
Institute of Strength Physics and Materials Science of the Siberian Branch of the Russian Academy of Sciences; National Research Tomsk Polytechnic University
Russian Federation

Alexander L. Skorentsev – Cand. Sci. (Eng.), Research Associate of the Laboratory of Powder Materials Consolidation Physics, ISPMS SB RAS; Engineer of the Department of Experimental Physics, School of Nuclear Engineering, National Research Tomsk Polytechnic University (TPU)

2/4 Akademichesky Prosp., Tomsk 634055, Russia

30 Lenina Prosp., Tomsk 634050, Russia

N. M. Rusin
Institute of Strength Physics and Materials Science of the Siberian Branch of the Russian Academy of Sciences
Russian Federation

Nikolay M. Rusin – Cand. Sci. (Eng.), Senior Research Scientist of the Laboratory of Powder Materials Consolidation Physics

2/4 Akademichesky Prosp., Tomsk 634055, Russia

V. E. Likharev
Institute of Strength Physics and Materials Science of the Siberian Branch of the Russian Academy of Sciences; National Research Tomsk Polytechnic University
Russian Federation

Vadim E. Likharev – Engineer of the Laboratory of Powder Materials Consolidation Physics, ISPMS SB RAS; Student of the engineering school of new production materials, TPU

2/4 Akademichesky Prosp., Tomsk 634055, Russia

30 Lenina Prosp., Tomsk 634050, Russia

A. Yu. Nikonov
Institute of Strength Physics and Materials Science of the Siberian Branch of the Russian Academy of Sciences; National Research Tomsk State University
Russian Federation

Anton Yu. Nikonov – Cand. Sci. (Phys.Math.), Research Associate of the Laboratory of Computer-Aided Design of Materials, ISPMS SB RAS; Associate Professor of the Department of Physics of Metals, Faculty of Physics, National Research Tomsk State University (TSU)

2/4 Akademichesky Prosp., Tomsk 634055, Russia

36 Lenina Prosp., Tomsk 634050, Russia

A. I. Dmitriev
Institute of Strength Physics and Materials Science of the Siberian Branch of the Russian Academy of Sciences; National Research Tomsk State University
Russian Federation

Andrey I. Dmitriev – Dr. Sci. (Phys.Math.), Principal Researcher of the Laboratory of Powder Materials Consolidation Physics, ISPMS SB RAS; Professor of the Department of Physics of Metals, Faculty of Physics, TSU

2/4 Akademichesky Prosp., Tomsk 634055, Russia

36 Lenina Prosp., Tomsk 634050, Russia

Notifications