Surface modifying, using charge-particle beams, photon and plasma fluxes
https://doi.org/10.17073/1997-308X-2013-1-59-63
Abstract
Electric-explosive carburizing followed by electron-beam processing of titanium surface has been carried out. As a result of such combined proces- sing, the processed surface microhardness is increased 14 times. Scanning electron microscope was used for studying the morphology of the coat- ing formed on the processed surface, the structure and elemental composition of the alloyed zone depending on the absorbed power density during electron-beam processing.
About the Authors
Yu. F. Ivanov
Институт сильноточной электроники (ИСЭ) СО РАН, 634055, г. Томск, пр-т Академический, 2/3
Russian Federation
E. A. Budovskikh
Сибирский государственный индустриальный университет (СибГИУ), 654007, г. Новокузнецк, ул. Кирова, 42
Russian Federation
V. E. Gromov
Сибирский государственный индустриальный университет (СибГИУ), 654007, г. Новокузнецк, ул. Кирова, 42
Russian Federation
L. P. Bashchenko
Russian Federation
S. V. Raikov
Сибирский государственный индустриальный университет (СибГИУ), 654007, г. Новокузнецк, ул. Кирова, 42
Russian Federation
References
1. Bagautdinov A. Ya., Budovskikh E. A., Ivanov Yu. F., Gromov V. E. Fizicheskie osnovy elektrovzryvnogo legirovaniya metallov i splavov. Novokuznetsk: Izd-vo SibGIU, 2007.
2. Kolachev B. A., Eliseev Yu. S., Bratukhin A. G., Talalaev V. D. Titanovye splavy v konstruktsiyakh i proizvodstve avia-dvigateleĭ i aviatsionno-kosmicheskoĭ tekhniki / Pod red. A. G. Bratukhina. M.: Izd-vo MAI, 2001.
3. Bashchenko L. P., Soskova N. A., Budovskikh E. A. i dr. // Deformatsiya i razrushenie materialov. 2012. No 3. S. 15.
4. Ivanov Yu. F., Karpiĭ S. V., Morozov M. M. i dr. Struktura, fazovyĭ sostav i svoĭstva titana posle elektrovzryvnogo legirovaniya i elektronno-puchkovoĭ obrabotki. Novokuznetsk: Izd-vo NPK, 2010.
5. Budovskikh E. A., Bagautdinov A. Ya., Vostretsova A. V., Gromov V. E. // Izv. vuzov. Fizika. 2008. No 5. S. 71.
For citations:
Ivanov Yu.F.,
Budovskikh E.A.,
Gromov V.E.,
Bashchenko L.P.,
Raikov S.V.
Surface modifying, using charge-particle beams, photon and plasma fluxes. Powder Metallurgy аnd Functional Coatings. 2013;(1):59-63.
(In Russ.)
https://doi.org/10.17073/1997-308X-2013-1-59-63
Views:
1003
Email this article 