The effect of powerful impulse charged particle beam parameters on intensity and energy efficiency of metal surface erosion
https://doi.org/10.17073/1997-308X-2013-2-48-54
Abstract
The dependences of metal surface erosion factors on the parameters of powerful impulse charged particle beams has been investigated with the use of mathematical simulation of dissipation processes of their energy in solid body. The energy balance over the target surface for beams with initial particle energy from 10 to 1000 keV and power density up to 1010 W/cm2 has been plotted. Power efficiency of atom removal away from the metal surface has been studied depending on the type particles, their initial energy, power density, and current impulse duration.
About the Authors
G. A. BleikherRussian Federation
V. P. Krivobokov
Russian Federation
References
1. Davis H. A., Remnev G. E., Stinnet R. W., Yatsui K. // MRS Bull. 1996. No 8. P. 58.
2. Renk T. J., Provencio P. P., Prasad S.V. et al. // Proc. IEEE. 2004. Vol. 92, No 7. P. 1057.
3. Шулов В. А., Ночовная Н. А., Ремнев Г. Е., Львов А. Ф. // Физика и химия обработки материалов. 2003. No 1. С. 22.
4. Пайкин А. Г., Шулов В. А., Крайников А. В. и др. // Физика и химия обработки материалов. 2007. No 3. С. 44.
5. Shulov V. A., Bytzenko O. A., Teryaev D. A. et al. // Proc. 10-th Int. Conf. on Modification of Materials with Particle Beams and Plasma Flows (Tomsk, Sept. 19–24, 2010). Tomsk: IOA SB RAS, 2010. P. 359.
6. Блейхер Г. А., Кривобоков В. П., Пащенко О. В. Тепломассоперенос в твердом теле под действием мощных импульсных пучков заряженных частиц. Новосибирск: Наука, 1999.
7. Блейхер Г. А., Кривобоков В. П. // Изв. вузов. Порошк. металлургия и функц. покрытия. 2008. No 1. С. 23.
8. Bleykher G. A., Krivobokov V. P. // Nucl. Instrum. Meth. Phys. Res. B. 2012. Vol. 292. P. 34.
9. Блейхер Г. А., Кривобоков В. П., Платонов М. А. // Изв. вузов. Физика. 2007. No 8. С. 49.
Review
For citations:
Bleikher G.A., Krivobokov V.P. The effect of powerful impulse charged particle beam parameters on intensity and energy efficiency of metal surface erosion. Powder Metallurgy аnd Functional Coatings. 2013;(2):48-54. (In Russ.) https://doi.org/10.17073/1997-308X-2013-2-48-54