Phenomenological model of mill surface lining during grinding
https://doi.org/10.17073/1997-308X-2013-1-8-12
Abstract
A mathematical model of self-lining of the internal surface of a mill and grinding bodies under the conditions of mechanical processing of two-com- ponent mixture has been constructed. The process dynamics is ascertained. The optimum modes allowing us to reach the prescribed degree of size reduction of the mixture are found with minimum losses of substance to self-lining. The main conclusions of the theoretical analysis are confirmed experimentally.
About the Authors
O. V. Lapshin
Отдел структурной макрокинетики Томского научного центра (ТНЦ) СО РАН
(634021, г. Томск, пр. Академический, 10/3). Тел.: (3822) 49-22-94
Russian Federation
Russian Federation
N. G. Kasatsky
Отдел структурной макрокинетики Томского научного центра (ТНЦ) СО РАН
(634021, г. Томск, пр. Академический, 10/3). Тел.: (3822) 49-22-94
Russian Federation
Russian Federation
V. K. Smolyakov
Отдел структурной макрокинетики Томского научного центра (ТНЦ) СО РАН
(634021, г. Томск, пр. Академический, 10/3). Тел.: (3822) 49-22-94
Russian Federation
Russian Federation
References
1. Перов В. А., Васильева А. А. // Горн. журн. 1961. No 7. С. 69.
2. Ходаков Г. С. Физика измельчения. М.: Наука, 1972.
3. Лапшин О. В., Смоляков В. К. // Физ. мезомеханика. 2011. Т. 14, No 2. С. 77.
Review
For citations:
Lapshin O.V., Kasatsky N.G., Smolyakov V.K. Phenomenological model of mill surface lining during grinding. Powder Metallurgy аnd Functional Coatings (Izvestiya Vuzov. Poroshkovaya Metallurgiya i Funktsional'nye Pokrytiya). 2013;(1):8-12. (In Russ.) https://doi.org/10.17073/1997-308X-2013-1-8-12
Views:
854
Email this article 