| |
| Issue |
Title |
| |
| Vol 19, No 3 (2025) |
Development of a polyoxymethylene-based feedstock for metal injection molding using 09Cr16Ni4Nb stainless steel powder |
Abstract
PDF (Eng)
PDF (Rus)
|
|
A. V. Parkhomenko, A. P. Amosov, A. M. Pastukhov |
| |
| Vol 19, No 1 (2025) |
Effect of quenching and tempering on the structure and properties of hot-deformed powder steels with ultrafine particles |
Abstract
PDF (Eng)
PDF (Rus)
|
|
M. S. Egorov, R. V. Egorova, A. V. Mozgovoy, K. V. Gantimurov, M. V. Kovtun |
| |
| Vol 19, No 1 (2025) |
Evaluation of the stress state in a cold-pressed seal briquette for a gas compressor unit |
Abstract
PDF (Rus)
PDF (Eng)
|
|
A. A. Jafarova |
| |
| Vol 18, No 4 (2024) |
Experimental study of the feasibility of producing materials based on the metastable phase Ti2Fe through explosive compaction and heat treatment |
Abstract
PDF (Eng)
PDF (Rus)
|
|
A. V. Krokhalev, V. O. Kharlamov, D. R. Chernikov, S. V. Kuzmin, V. I. Lysak |
| |
| Vol 18, No 4 (2024) |
Dissolution-precipitation and cobalt grain growth during liquid phase sintering of Cu–Sn–Co and Cu–Sn–Co–W powder materials |
Abstract
PDF (Rus)
PDF (Eng)
|
|
E. G. Sokolov, A. V. Ozolin, E. E. Bobylev, D. A. Golius, S. A. Arefieva |
| |
| Vol 18, No 3 (2024) |
Structure and properties of hot-forged powder steel–bronze bimetal with SiC additives |
Abstract
PDF (Rus)
PDF (Eng)
|
|
V. Yu. Dorofeyev, E. N. Bessarabov, A. N. Sviridova, I. V. Ivanova, L. I. Svistun, R. A. Vodolazhenko |
| |
| Vol 18, No 2 (2024) |
Influence of copper salts on the physical and mechanical properties of copper–graphite composite materials |
Abstract
PDF (Eng)
PDF (Rus)
|
|
N. D. Ogleznev, I. I. Yakubaev, S. А. Oglezneva, S. Е. Porozova |
| |
| Vol 17, No 2 (2023) |
The impact of impurities on the Al–Fe–C system phase composition changes during sintering |
Abstract
PDF (Rus)
PDF (Eng)
|
|
E. N. Korosteleva, A. G. Knyazeva, M. A. Anisimova, I. O. Nikolaev |
| |
| Vol 17, No 1 (2023) |
Obtaining and properties of rolled products from clad powders NPG-80 and Nibon-20 |
Abstract
PDF (Rus)
PDF (Eng)
|
|
I. M. Mal'tsev, Yu. A. Getmanovsky |
| |
| Vol 17, No 1 (2023) |
Prediction of the concentration inhomogeneity of powder magnetic hard alloys based on the Fe-Cr-Co-Mo system and the effect of Sm additions on their magnetic properties |
Abstract
PDF (Rus)
PDF (Eng)
|
|
M. A. Marieva, A. A. Shatsov |
| |
| No 4 (2022) |
MAX phase Ti2AlN synthesis by reactive sintering in vacuum |
Abstract
PDF (Rus)
PDF (Eng)
|
|
A. V. Linde, A. A. Kondakov, I. A. Studenikin, N. A. Kondakova, V. V. Grachev |
| |
| No 1 (2022) |
Mechanism of liquid-phase interaction between nanocrystalline composition (VC0.40О0.53–C)–C and titanium nickelide |
Abstract
PDF (Rus)
|
|
Yu. A. Avdeeva, A. N. Ermakov, I. V. Luzhkova, L. Kh. Askarova |
| |
| No 2 (2021) |
Production of high-entropy Fe–Cr–Co–Ni–Ti alloy by mechanical alloying and spark plasma sintering of a powder mixture |
Abstract
PDF (Rus)
|
|
N. A. Kochetov, A. S. Rogachev, D. Yu. Kovalev, A. S. Shchukin, S. G. Vadchenko |
| |
| No 3 (2021) |
Control of hysteretic properties in powder alloys based on the Fe–Cr–Co system |
Abstract
PDF (Rus)
|
|
M. A. Marieva, A. A. Shatsov |
| |
| No 3 (2021) |
Formation of structure and properties of hot-deformed powder steels microalloyed with sodium and calcium during thermal and thermomechanical treatment |
Abstract
PDF (Rus)
|
|
V. Yu. Dorofeyev, A. N. Sviridova, V. A. Samoilov |
| |
| No 1 (2021) |
Features of determining the deformed state of a particle material during hot stamping of porous moldings |
Abstract
PDF (Rus)
|
|
B. G. Gasanov, A. A. Aganov, P. V. Sirotin |
| |
| No 4 (2020) |
Mathematical modeling of single action pressing of powder materials under dry friction conditions |
Abstract
PDF (Rus)
|
|
S. V. Karpov, L. S. Stel’makh, A. M. Stolin |
| |
| No 3 (2020) |
Numerical analysis of porous blank die forging in the die with the implementation of active friction forces |
Abstract
PDF (Rus)
|
|
G. A. Bagliuk, S. F. Kyryliuk |
| |
| No 3 (2020) |
Research of reinforcement phase formation on the borders of sintered berillium grains |
Abstract
PDF (Rus)
|
|
A. V. Revutsky, V. Yu. Syrnev, V. Yu. Lopatin, O. V. Semilutskaya, T. A. Segeda |
| |
| No 2 (2020) |
Chemical composition and structure of interfacial boundaries in Cr3C2-Ti powder hard alloys after explosive pressing and subsequent heating |
Abstract
PDF (Rus)
|
|
A. V. Krokhalev, V. O. Kharlamov, S. V. Kuzmin, V. I. Lysak |
| |
| No 1 (2020) |
Properties of the surface layer after high-energy treatment by powder particles |
Abstract
PDF (Rus)
|
|
E. V. Petrov, I. V. Saikov, G. R. Saikova, V. S. Trofimov |
| |
| No 4 (2019) |
The effect of sodium microalloying on the rolling contact fatigue and mechanical properties of hot-deformed powder steels |
Abstract
PDF (Rus)
|
|
V. Yu. Dorofeyev, A. N. Sviridova, L. I. Svistun |
| |
| No 2 (2019) |
Ellipsometric study of optical properties and oxidation processes of compacted powders based on aluminum alloys |
Abstract
PDF (Rus)
|
|
L. A. Akashev, N. A. Popov, V. G. Shevchenko, A. I. Ananyev |
| |
| No 4 (2018) |
New masteralloys for sintered high strength steels – the attractive route between mixing and prealloying |
Abstract
PDF (Eng)
|
|
R. Oro, M. Jaliliziyaeian, J. Dunkley, C. Gierl-Mayer, H. Danninger |
| |
| No 4 (2018) |
Emerging challenges in solid-state sintering science and technology |
Abstract
PDF (Eng)
|
|
Suk-Joong L. Kang, Rajendra K. Bordia, Eugene A. Olevsky |
| |
| No 4 (2018) |
Compressibility curves of iron-base powders: Support for evaluating stresses on compaction tools or just a method for evaluation of raw materials? |
Abstract
PDF (Eng)
|
|
G. F. Bocchini |
| |
| No 4 (2018) |
On the question of the applicability of G.V. Samsonov’s activated sintering concept in studying the processes of powder material deformation |
Abstract
PDF (Rus)
|
|
V. Yu. Dorofeyev, D. N. Sviridova, Kh. S. Kochkarova |
| |
| No 3 (2018) |
Contact interaction peculiarities at the boundary of layers of «structural steel–high-speed steel» hot-forged powder bimetal |
Abstract
PDF (Rus)
|
|
Yu. G. Dorofeyev, V. Yu. Dorofeyev, A. V. Babets, Eu. N. Bessarabov, O. N. Romanova, A. N. Sviridova |
| |
| No 3 (2018) |
Experimental determination and calculation of powder mixture heating temperature at explosive compaction |
Abstract
PDF (Rus)
|
|
S. V. Khaustov, A. V. Krokhalev, V. O. Kharlamov, M. A. Tupitsin, S. V. Kuz’min, V. I. Lysak |
| |
| No 2 (2018) |
INFLUENCE OF THE TWO-STAGE SINTERING MODE ON STRUCTURE FORMATION AND PROPERTIES OF POWDERED ALL-PRESSED BIMETALLIC IRON-BASED MATERIALS |
Abstract
PDF (Rus)
|
|
B. G. Gasanov, V. G. Perederiy, A. D. Efimov, S. S. Baev |
| |
| No 2 (2018) |
MECHANICAL ALLOYING WITH PARTIAL AMORPHIZATION OF FE–CR–CO–NI–MN MULTICOMPONENT POWDER MIXTURE AND ITS SPARK PLASMA SINTERING FOR COMPACT HIGH-ENTROPY MATERIAL PRODUCTION |
Abstract
PDF (Rus)
|
|
N. A. Kochetov, A. S. Rogachev, A. S. Shchukin, S. G. Vadchenko, I. D. Kovalev |
| |
| No 1 (2018) |
OPTIMISATION OF AUTOMATIC DOSED MOULD FILLING WITH FERROMAGNETIC POWDERS |
Abstract
PDF (Rus)
|
|
I. N. Egorov, S. I. Egorova |
| |
| No 2 (2017) |
ON THE POSSIBILITY OF OBTAINING HARD ALLOYS FROM MIXTURES OF CARBIDE POWDERS AND METALS BY EXPLOSIVE COMPACTING WITHOUT SINTERING |
Abstract
PDF (Rus)
|
|
A. V. Krokhalev, V. O. Kharlamov, M. A. Tupitsin, S. V. Kuzmin, V. I. Lysak |
| |
| No 2 (2017) |
REDUCING METAL CONTENT IN PCD POLYCRYSTALLINE DIAMOND LAYER BY CHEMICAL AND ELECTROCHEMICAL ETCHING |
Abstract
PDF (Rus)
|
|
N. I. Polushin, M. S. Ovchinnikova, M. N. Sorokin |
| |
| No 2 (2017) |
CHANGE IN STRENGTH, HARDNESS AND CRACKING RESISTANCE IN TRANSITION FROM MEDIUM-GRAINED TO ULTRAFINE HARD ALLOY |
Abstract
PDF (Rus)
|
|
M. I. Dvornik, A. V. Zaitsev |
| |
| No 2 (2017) |
FORMATION OF AMORPHOUS STRUCTURES AND THEIR CRYSTALLIZATION IN CU–TI SYSTEM BY HIGH-ENERGY BALL MILLING |
Abstract
PDF (Rus)
|
|
N. F. Shkodich, A. S. Rogachev, S. G. Vadchenko, I. D. Kovalev, A. A. Nepapushev, S. S. Rоuvimov, A. S. Mukasyan |
| |
| No 1 (2017) |
SINTERING AS A METHOD OF PRODUCING HARD AL–SN COMPOSITES WITH A HIGH SECOND PHASE CONTENT |
Abstract
PDF (Rus)
|
|
N. M. Rusin, A. L. Skorentsev |
| |
| No 3 (2016) |
ANISOTROPY OF MECHANICAL PROPERTIES OF PRODUCTS MANUFACTURED USING SELECTIVE LASER MELTING OF POWDERED MATERIALS |
Abstract
PDF (Rus)
|
|
A. A. Popovich, V. Sh. Sufiiarov, E. V. Borisov, I. A. Polozov, D. V. Masaylo, A. V. Grigoriev |
| |
| No 2 (2016) |
Identification of modified Drucker-Prager yield condition and modeling of plasticized titanium raw material compaction |
Abstract
PDF (Rus)
|
|
I. M. Berezin, A. V. Nesterenko, A. G. Zalazinskii |
| |
| No 4 (2015) |
The role of bulk and mass effects of reactions in reaction sintering processes |
Abstract
PDF (Rus)
|
|
V. N. Antsiferov, V. G. Gilev |
| |
| No 2 (2015) |
Investigation into Compacting the Nanopowders and Micropowders of Tungsten Carbide in a High-Pressure Apparatus |
Abstract
PDF (Rus)
|
|
A. P. Garshin, S. P. Bogdanov, V. A. Ponomarenko |
| |
| No 4 (2014) |
Change of Structure and Properties of Sintered Alloys under the Influence Nanosized Carbon Additives |
Abstract
PDF (Rus)
|
|
P. A. Vityaz, V. I. Zhornik, S. A. Kovalyova, V. A. Kukareko |
| |
| No 3 (2014) |
Peculiarities of Compacting during Sintering of VH8M Alloy with Addition of Nanosized Tungsten Carbide |
Abstract
PDF (Rus)
|
|
D. V. Fedorov, O. V. Semenov, V. I. Rumyantsev, S. S. Ordanyan |
| |
| No 3 (2014) |
Powdered Calcium Hydride Intermetallide TiNi |
Abstract
PDF (Rus)
|
|
A. V. Kasimtcev, G. V. Markova, A. V. Shuytcev, Yu. V. Levinsky, T. A. Sviridova, A. V. Alpatov |
| |
| No 1 (2014) |
Study of isothermical sintering of finely divided and mechanically alloyed iron powders |
Abstract
PDF (Rus)
|
|
S. A. Oglezneva, M. N. Portalov |
| |
| No 4 (2013) |
Development of domestic powdered granulated material with polyformaldehyde based binder for MIM-process |
Abstract
PDF (Rus)
|
|
A. V. Parkhomenko, A. P. Amosov, A. R. Samboruk, S. V. Ignatov, D. V. Kostin, A. S. Shultimova |
| |
| No 4 (2013) |
Dependence of mechanical properties of diamond segments on their composition |
Abstract
PDF (Rus)
|
|
R. Kh. Atabiev, N. I. Polushin, A. I. Laptev, M. N. Sorokin, A. B. Tleuzhev, A. S. Kushkabiev |
| |
| No 4 (2013) |
Heat treatment of steel–TiC composite materials produced by overlay laser welding |
Abstract
PDF (Rus)
|
|
V. K. Narva, A. V. Matants, Zh. A. Sentyurina |
| |
| No 2 (2013) |
Laser processing of sintered powdered SPN14A7M5 steel |
Abstract
PDF (Rus)
|
|
A. V. Marants, Zh. A. Sentyurina, I. A. Yadroitseva, V. K. Narva, I. Yu. Smurov |
| |
| No 2 (2013) |
Production process optimization of filler grain hard alloy metal with uniform structure and low residual porosity |
Abstract
PDF (Rus)
|
|
A. P. Amosov, D. A. Zakharov, A. V. Salnikov |
| |
| No 3 (2013) |
High-speed electropulse plasma sintering of nano-structural tungsten carbide. Part 1. Experiment |
Abstract
PDF (Rus)
|
|
V. N. Chuvildeyev, Yu. V. Blagoveshchensky, M. S. Boldin, A. V. Moskvichyova, N. V. Sakharov, A. V. Nokhrin, N. V. Isaeva, S. V. Shotin, Yu. G. Lopatin, A. V. Pisklov, D. N. Kotkov |
| |
| No 3 (2013) |
The effect of process sintering parameters on structure and properties of VK5 hard alloy of tungsten carbide SHS powder |
Abstract
PDF (Rus)
|
|
A. A. Zaitsev, V. I. Vershinnikov, V. S. Panov, E. A. Levashov, I. P. Borovinskaya, I. Yu. Konyashin, S. I. Rupasov, E. I. Patsera, V. N. Shumenko, E. I. Zamulayeva |
| |
| No 1 (2013) |
Comparison of properties of steel–TiC materials produced by laser process and powder metallurgy |
Abstract
PDF (Rus)
|
|
A. V. Marants, Zh. A. Sentyurina, I. A. Yadroitsev, I. A. Yadroitseva, V. K. Narva, I. Yu. Smurov |
| |
| No 1 (2013) |
Simulation and optimization of extrusion process of cylindrical work-pieces prepared from plasticized charge mixtures of powder and composite materials in strew presses |
Abstract
PDF (Rus)
|
|
G. V. Perelman |
| |
| 1 - 54 of 54 Items |
|
