| |
| Issue |
Title |
| |
| Vol 19, No 4 (2025) |
Iron-based pseudosalloys for antifriction applications with enhanced mechanical and tribological properties developed at the O.V. Roman Powder Metallurgy Institute of the National Academy of Sciences of Belarus |
Abstract
PDF (Eng)
PDF (Rus)
|
|
L. N. Dyachkova, P. A. Vityaz |
| |
| Vol 19, No 3 (2025) |
Obtaining ceramics from boron carbide with chromium-based additives (Cr3C2, CrB2) |
Abstract
PDF (Eng)
PDF (Rus)
|
|
Yu. Z. Vassilyeva, P. V. Povalyaev, A. A. Kuznetsova, A. Ya. Pak |
| |
| Vol 19, No 2 (2025) |
Comparison of properties of hard magnetic isotropic powder-processed Fe–Cr–Co alloys doped with titanium and titanium hydride |
Abstract
PDF (Rus)
PDF (Eng)
|
|
A. S. Ustyukhin, V. A. Zelensky, I. M. Milyaev, D. Yu. Kovalev, V. S. Shustov, M. I. Alymov |
| |
| Vol 19, No 2 (2025) |
Optimization of powder mixing parameters for the Al–Sn–Pb system for use in selective laser melting |
Abstract
PDF (Rus)
PDF (Eng)
|
|
K. O. Akimov, A. L. Skorentsev, N. M. Rusin, V. E. Likharev, A. Yu. Nikonov, A. I. Dmitriev |
| |
| Vol 19, No 1 (2025) |
Influence of gear ratio on the energy-force conditions of grinding body collisions in a planetary mill |
Abstract
PDF (Eng)
PDF (Rus)
|
|
A. V. Aborkin, A. I. Elkin, V. V. Ryabkova, A. P. Bugayov, A. R. Bobozhanov, M. I. Alymov |
| |
| Vol 18, No 5 (2024) |
Structure and magnetic properties of strontium hexaferrite powder after milling in a beater mill in a magnetoliquefied layer followed by annealing |
Abstract
PDF (Eng)
PDF (Rus)
|
|
I. N. Egorov, N. Ya. Egorov, Yu. V. Rusalev, S. I. Egorova |
| |
| Vol 18, No 5 (2024) |
Synthesis of fine tungsten powders with low impurity content |
Abstract
PDF (Rus)
PDF (Eng)
|
|
A. B. Ankudinov, E. V. Evstratov, M. I. Alymov |
| |
| Vol 18, No 4 (2024) |
Evolution of the structural-phase state of steel swarf during its processing into a powdered product |
Abstract
PDF (Eng)
PDF (Rus)
|
|
E. N. Korosteleva, I. O. Nikolaev |
| |
| Vol 18, No 3 (2024) |
Plasma-chemical synthesis of highly dispersed core–shell structures from a mechanical mixture of titanium carbide and titanium nickelide |
Abstract
PDF (Rus)
PDF (Eng)
|
|
Yu. A. Avdeeva, I. V. Luzhkova, A. M. Murzakaev, A. N. Ermakov |
| |
| Vol 17, No 4 (2023) |
Investigation of physical, chemical, and technological properties of titanium powder obtained by thermal dehydrogenation in vacuum |
Abstract
PDF (Rus)
PDF (Eng)
|
|
N. P. Cherezov, M. I. Alymov |
| |
| Vol 17, No 4 (2023) |
Characteristics of granule solidification in gas atomization of molten beryllium |
Abstract
PDF (Rus)
PDF (Eng)
|
|
B. V. Syrnev, G. S. Pestova, O. V. Semilutskaya, F. S. Tuganbaev |
| |
| Vol 17, No 3 (2023) |
Natural and thermally stimulated aging of nanosized powders of cobalt ferrospinel |
Abstract
PDF (Rus)
PDF (Eng)
|
|
A. A. Nevmyvaka, V. A. Zhuravlev, V. I. Itin |
| |
| No 4 (2022) |
Electrode processes in the production of microdispersed titanium powder by volumetric electrolytic reduction of its ions with sodium dissolved in the BaCl2–CaCl2–NaCl melt in the absence of titanium halides in the initial melt |
Abstract
PDF (Rus)
PDF (Eng)
|
|
V. A. Lebedev, V. V. Polyakov |
| |
| No 4 (2022) |
Structure and properties of titanium hydride powder obtained from titanium sponge by SHS hydrogenation |
Abstract
PDF (Rus)
PDF (Eng)
|
|
N. P. Cherezov, M. I. Alymov |
| |
| No 2 (2022) |
Composition and structure of «core–shell» nanocrystalline particles based on titanium-molybdenum carbides obtained under the conditions of plasma-chemical synthesis |
Abstract
PDF (Rus)
|
|
Yu. A. Avdeeva, I. V. Luzhkova, A. N. Ermakov |
| |
| No 2 (2022) |
Radar-absorbing composite materials based on ferrite powders |
Abstract
PDF (Rus)
|
|
G. P. Benderskiy, Yu. M. Molostova, P. A. Rumyantsev, S. V. Serebryannikov, S. S. Serebryannikov |
| |
| No 1 (2022) |
Production of finely dispersed titanium powder by volumetric reduction of its ions with sodium dissolved in the BaCl2–CaCl2–NaCl melt |
Abstract
PDF (Rus)
|
|
V. A. Lebedev, V. V. Polyakov |
| |
| No 1 (2022) |
Structural and morphological study of the Al–Si–Mg–SiC composite material produced by mechanical alloying |
Abstract
PDF (Rus)
|
|
A. A. Shavnev, S. V. Nerush, E. I. Kurbatkina, D. V. Kosolapov, P. N. Medvedev |
| |
| No 3 (2021) |
Formation of carbon nanotubes and microsilica when obtaining crystalline silicon in three-phase electric ore smelting furnaces |
Abstract
PDF (Rus)
|
|
M. P. Kuz’min, V. V. Kondratiev, A. S. Kuz’mina, A. E. Burdonov, Jia Q. Ran |
| |
| No 1 (2021) |
The effect of the concentration of vanadium pentoxide hydrogel applied on ASD-4 grade aluminum on its structural and adsorption properties |
Abstract
PDF (Rus)
|
|
A. V. Ryabina, V. G. Shevchenko |
| |
| No 1 (2021) |
Structure forming of Cu–W pseudoalloys prepared in different routes |
Abstract
PDF (Rus)
|
|
S. G. Vadchenko, E. V. Suvorova, N. I. Mukhina, I. D. Kovalev, E. V. Illarionova |
| |
| No 4 (2020) |
Role of nanopowder agglomerates in forming the structure and properties of ceramic materials |
Abstract
PDF (Rus)
|
|
S. E. Porozova, V. B. Kul’met’eva, T. Yu. Pozdeeva, V. O. Shokov |
| |
| No 4 (2020) |
Preparation of CuCr pseudo-alloys by deposition of copper from a solution onto chromium powders with simultaneous mechanical activation of the mixture |
Abstract
PDF (Rus)
|
|
S. G. Vadchenko, E. V. Suvorova, N. I. Mukhina, I. D. Kovalev, E. V. Illarionova |
| |
| No 3 (2020) |
Production of WC-15Co ultrafine-grained hard alloy from powder obtained by VK15 alloy waste spark erosion in water |
Abstract
PDF (Rus)
|
|
M. I. Dvornik, E. A. Mikhailenko |
| |
| No 1 (2020) |
Determination of the growth time period of loose zinc deposit using interval analysis methods |
Abstract
PDF (Rus)
|
|
V. S. Nikitin, T. N. Ostanina, S. I. Kumkov, V. M. Rudoy, N. I. Ostanin |
| |
| No 1 (2020) |
Copper deposition from its sulfate solution onto titanium powder with simultaneous mechanical activation of mixture |
Abstract
PDF (Rus)
|
|
S. G. Vadchenko, E. V. Suvorova, N. I. Mukhina, I. D. Kovalev |
| |
| No 1 (2020) |
The effect of surfactants on the particle size of iron, cobalt and nickel nanopowders |
Abstract
PDF (Rus)
|
|
T. H. Nguyen, V. M. Nguyen |
| |
| No 3 (2019) |
Spheroidization of iron powder in a microwave and hybrid plasma torches |
Abstract
PDF (Rus)
|
|
S. A. Eremin, V. N. Anikin, D. V. Kuznetsov, I. A. Leontiev, Yu. D. Stepanov, V. Z. Dubinin, A. M. Kolesnikova, Yu. M. Yashnov |
| |
| No 3 (2019) |
Using mechanochemical treatment to obtain metal powders for energy-intensive combustible compositions. 2. Structure and reactivity of mechanically activated Al–modifier–SiО2 mixtures |
Abstract
PDF (Rus)
|
|
N. N. Mofa, B. S. Sadykov, A. E. Bakkara, Z. A. Mansurov |
| |
| No 2 (2019) |
Preparation of activated carbon from cashew nut shells for water purification |
Abstract
PDF (Rus)
|
|
Brou Guillaume Kouassi, N. S. Serpokrylov, A. S. Smolyanichenko, E. G. Cheblakova, V. A. Gorina |
| |
| No 2 (2019) |
Structural state of the Ti–Al powder mixture at various stages of mechanoactivation treatment |
Abstract
PDF (Rus)
|
|
M. V. Loginova, A. V. Sobachkin, S. G. Ivanov, V. I. Yakovlev, A. A. Sitnikov, V. Yu. Filimonov, A. Yu. Myasnikov, A. Z. Negodyaev |
| |
| No 1 (2019) |
Influence of gas atomization parameters of alloy KhN60M on the characteristics of powder for laser surfacing |
Abstract
PDF (Rus)
|
|
K. V. Kalinin, S. A. Oglezneva, M. S. Nagaev |
| |
| No 3 (2018) |
FeCl2–CaCl2 melt volumetric reduction by calcium dissolved in calcium chloride |
Abstract
PDF (Rus)
|
|
V. V. Polyakov, A. V. Babin, V. A. Lebedev |
| |
| No 2 (2018) |
DETERMINATION OF PARAMETERS FOR THE PLASTICITY MODEL OF VT-22 ALLOY POWDER PARTICLES |
Abstract
PDF (Rus)
|
|
D. I. Kryuchkov, A. G. Zalazinskii, O. V. Romanova, A. V. Nesterenko, E. O. Smirnova |
| |
| No 2 (2018) |
USING MECHANOCHEMICAL TREATMENT TO OBTAIN METAL POWDERS FOR ENERGY-INTENSIVE COMBUSTIBLE COMPOSITIONS: 1. FEATURES OF THE STRUCTURE AND STATE OF ALUMINUM POWDER PARTICLES OBTAINED AS A RESULT OF MECHANOCHEMICAL TREATMENT |
Abstract
PDF (Rus)
|
|
N. N. Mofa, B. S. Sadykov, A. E. Bakkara, Z. A. Mansurov |
| |
| No 1 (2018) |
STUDYING ADSORPTION PECULIARITIES OF ULTRADISPERSED ALUMINUM NITRIDE POWDER BEFORE AND AFTER WATER TREATMENT |
Abstract
PDF (Rus)
|
|
A. V. Ryabina, V. G. Shevchenko |
| |
| No 2 (2017) |
ELECTROCHEMICAL SYNTHESIS OF ULTRAFINE INTERMETALLIC POWDERS BASED ON LANTHANUM AND COBALT FROM CHLORIDE MELTS |
Abstract
PDF (Rus)
|
|
Kh. B. Kushkhov, M. K. Vindizheva, R. A. Mukozheva, M. N. Kalibatova |
| |
| No 1 (2017) |
MATHEMATICAL MODEL OF METAL POWDER MELT IMPREGNATION WITH APPLICATION OF VIBRATION TREATMENT |
Abstract
PDF (Rus)
|
|
I. E. Ignat’ev, E. A. Pastukhov, O. V. Romanova |
| |
| No 1 (2017) |
STRUCTURE AND PROPERTIES OF DYSPROSIUM TITANATE POWDER PRODUCED BY THE MECHANOCHEMICAL METHOD |
Abstract
PDF (Rus)
|
|
Zh. V. Eremeeva, V. S. Panov, L. V. Myakisheva, A. V. Lizunov, A. A. Nepapushev, D. A. Sidorenko, A. V. Pavlik, E. V. Apostolova |
| |
| No 4 (2016) |
STUDYING OF THE DISSOLUTION PROCESS OF ZrO2–Y2O3–CeO2–Al2O3 NANOPOWDERS SYSTEM IN AQUEOUS MEDIA AT DIFFERENT pH |
Abstract
PDF (Rus)
|
|
E. N. Makarova, I. V. Antsiferova |
| |
| No 2 (2016) |
Research on dynamics of energy-intensive mill lining with mechanical activation of silicon powder |
Abstract
PDF (Rus)
|
|
O. V. Lapshin, O. A. Shkoda |
| |
| No 2 (2016) |
Electrochemical synthesis of holmium and nickel intermetallic powders in halide melts |
Abstract
PDF (Rus)
|
|
Kh. B. Kushkhov, R. A. Kardanova |
| |
| No 2 (2016) |
Methods for preparation and production of raw materials to make gadolinium oxide pellets used in composite uranium-gadolinium fuel production |
Abstract
PDF (Rus)
|
|
T. M. Aldazharov, Yu. G. Rusin, Zh. V. Eremeeva, T. A. Ryspaev |
| |
| No 1 (2016) |
Some features of nanodispersed and micron-size nickel powders produced by hydrogen reduction in the eddy magnetic field |
Abstract
PDF (Rus)
|
|
V. M. Nguyen, Yu. V. Konyukhov, D. I. Ryzhonkov, S. I. Kotov |
| |
| No 4 (2015) |
Composition, structure and properties of copper electroerosion powder formed in the kerosene medium |
Abstract
PDF (Rus)
|
|
E. V. Ageeva, N. M. Нoryakova, S. V. Pikalov, E. V. Ageev |
| |
| No 3 (2015) |
Preparation of tantalum powders by reduction of complex oxyfluoride compounds by sodium |
Abstract
PDF (Rus)
|
|
V. N. Kolosov, M. N. Miroshnichenko, T. Yu. Prokhorova, V. M. Orlov |
| |
| No 3 (2015) |
Structure and Properties of Sintered Alloys of the Aluminum–Chromium System |
Abstract
PDF (Rus)
|
|
P. P. Tarasov, A. S. Syromyatnikova |
| |
| No 2 (2015) |
Investigation into Absorption Properties of Ultradispersed Powder of the Alloy with the Composition Al–1,5%Ca–1,5%La before and after Treatment with Water |
Abstract
PDF (Rus)
|
|
A. V. Ryabina, V. G. Shevchenko |
| |
| No 2 (2015) |
Influence of Dispersed Microadditives on the Structure and Properties of Powder Carbon and High-Chromium Steel |
Abstract
PDF (Rus)
|
|
L. N. D’yachkova, M. M. Dechko |
| |
| No 1 (2015) |
INFLUENCE OF MODE PARAMETERS AND DESIGN OF THE EJECTION NOZZLE ON CHARACTERISTICS OF HIGHLY DISPERSED ALUMINUM POWDER. PART 2. INFLUENCE OF THE NOZZLE DESIGN |
Abstract
PDF (Rus)
|
|
V. A. Arkhipov, M. Ya. Evsevleev, I. K. Zharova, A. S. Zhukov, S. V. Zmanovskii, E. A. Kozlov, A. I. Konovalenko |
| |
| No 1 (2015) |
MECHANICAL PLATING THE FE–AL AND FE–CU DISPERSED SYSTEMS UNDER DYNAMIC LOADS |
Abstract
PDF (Rus)
|
|
Yu. V. Kontsevoi, A. V. Dolmatov, E. A. Pastukhov, T. F. Grigor’eva |
| |
| No 4 (2014) |
Influence of Duty Parameters and Design of Ejection Nozzle on Characterizes of Aluminum’s Dispersed Powder Part I. Influence of Duty Parameters of Nozzle |
Abstract
PDF (Rus)
|
|
V. A. Arkhipov, M. Ya. Evsevleyev, I. K. Zharova, A. S. Zhukov, S. V. Zmanovsky, E. A. Kozlov, A. I. Konovalenko |
| |
| No 3 (2014) |
The Mechanism of Phase Formation and Peculiarities of Mechanochemical Synthesis of Chromium Carbide |
Abstract
PDF (Rus)
|
|
O. N. Pripisnov, E. V. Shelekhov, S. I. Rupasov, A. S. Medvedev |
| |
| No 3 (2014) |
Determination of Surface of Dendritic Electrolytic Powders of Zinc and Assessment of their Fractal Dimension |
Abstract
PDF (Rus)
|
|
T. N. Ostanina, V. M. Rudoy, V. S. Nikitin, A. B. Darintseva, O. L. Zalesova, N. M. Porotnikova |
| |
| No 3 (2014) |
Influence of Activation Time on Parameters of Graphite Structure |
Abstract
PDF (Rus)
|
|
L. I. Mamina, T. R. Gilmanshina, V. I. Anikina, V. N. Baranov, S. I. Lytkina, A. K. Abkaryan, S. A. Khudonogov |
| |
| No 4 (2014) |
Influence Kind of Binder on the Properties of and Quality of Green Part from Hard Alloy BH8 |
Abstract
PDF (Rus)
|
|
D. V. Fyodorov, O. V. Semyonov, V. I. Rumyantsev, S. S. Ordanyan |
| |
| No 3 (2014) |
Synthesis of High-dispersive Powder of High Chromium Carbide with the Use of Nanofibrous Carbon |
Abstract
PDF (Rus)
|
|
Yu. L. Krutsky, K. D. Dyukova, A. G. Bannov, A. V. Ukhina, V. V. Sokolov, A. Yu. Pichugin, T. M. Krutskaya, O. V. Netskina, V. V. Samoilenko |
| |
| No 1 (2014) |
Electrochemical synthesis of nanosized powders of neodymium and praseodymium hexaborides and ternary compounds based on neodymium (praseodymium), boron and iron group metals from chloride-fluoride melts. |
Abstract
PDF (Rus)
|
|
Kh. B. Kushkhov, S. I. Chuksin, Z. A. Zhanikaeva |
| |
| No 2 (2014) |
Surface Area of Dispersion Materials on the Basis of Aluminium |
Abstract
PDF (Rus)
|
|
A. V. Ryabina, V. I. Kononenko |
| |
| No 2 (2014) |
Peculiarities of Mechanical Activation and Subsequent Thermal Explosion in the Powder System Nickel – Titanium |
Abstract
PDF (Rus)
|
|
O. A. Shkoda, N. G. Kasatsky |
| |
| 1 - 60 of 70 Items |
1 2 > >>
|
