| |
| Issue |
Title |
| |
| Vol 19, No 3 (2025) |
Structure and properties of two-layer coatings in the HfSi2–HfB2–MoSi2 system produced by electrospark deposition and magnetron sputtering |
Abstract
PDF (Rus)
PDF (Eng)
|
|
E. I. Zamulaeva, P. A. Loginov, Ph. V. Kiryukhantsev-Korneev, N. V. Shvindina, M. I. Petrzhik, E. A. Levashov |
| |
| Vol 19, No 3 (2025) |
Structure and properties of antifriction Ti–Cr–Ni–Cu–Sn–P–C–N coatings deposited by magnetron sputtering of composite SHS targets |
Abstract
PDF (Eng)
PDF (Rus)
|
|
Ph. V. Kiryukhantsev-Korneev, A. D. Chertova, Yu. S. Pogozhev, E. A. Levashov |
| |
| Vol 19, No 2 (2025) |
Use of Ni and Al granules and WC powder for electric spark deposition of metalloceramic coatings |
Abstract
PDF (Rus)
PDF (Eng)
|
|
A. A. Burkov |
| |
| Vol 19, No 1 (2025) |
Research of heat-resistant glass-ceramic coating characteristics in high-speed air plasma flow |
Abstract
PDF (Rus)
PDF (Eng)
|
|
A. N. Astapov, B. E. Zhestkov, A. S. Rtishcheva |
| |
| Vol 18, No 5 (2024) |
Erosion resistance of ZrBN protective coatings deposited by reactive pulsed magnetron sputtering |
Abstract
PDF (Rus)
PDF (Eng)
|
|
A. D. Chertova, A. V. Levanov, B. B. Meshkov, E. A. Levashov, Ph. V. Kiryukhantsev-Korneev |
| |
| Vol 18, No 5 (2024) |
Formation of wear-resistant coatings during electric arc surfacing with ultrasonic vibrations |
Abstract
PDF (Eng)
PDF (Rus)
|
|
D. V. Priyatkin, A. A. Artem’ev, V. I. Lysak |
| |
| Vol 18, No 4 (2024) |
Oxidation-resistant Zr–Mo–Si–B coatings deposited by DCMS and HIPIMS methods |
Abstract
PDF (Rus)
PDF (Eng)
|
|
A. D. Chertova, F. I. Chudarin, I. O. Vakhrusheva, Yu. Yu. Kaplansky, X. Ren, P. Feng, E. A. Levashov, Ph. V. Kiryukhantsev-Korneev |
| |
| Vol 17, No 4 (2023) |
Electrospark deposition of Fe–Cr–Cu coatings on St3 steel |
Abstract
PDF (Rus)
PDF (Eng)
|
|
A. A. Burkov, M. A. Kulik |
| |
| Vol 17, No 4 (2023) |
Transformation of the nickel aluminide alloy structure through the application of a heat-resistant coating using oscillation electrode surfacing |
Abstract
PDF (Rus)
PDF (Eng)
|
|
I. V. Zorin, V. I. Lysak, V. O. Kharlamov, S. A. Fastov |
| |
| Vol 17, No 3 (2023) |
Effect of HG40 and HS123 hard alloy tool substrates on the properties of hardening coating |
Abstract
PDF (Rus)
PDF (Eng)
|
|
V. S. Sergevnin, I. V. Blinkov, D. S. Belov, A. P. Demirov, A. V. Chernogor, T. A. Lobova, A. I. Laptev |
| |
| Vol 17, No 3 (2023) |
TaC-based wear-resistant coatings obtained by magnetron sputtering and electro-spark deposition for wedge gate valve protection |
Abstract
PDF (Rus)
PDF (Eng)
|
|
A. D. Sytchenko, M. N. Fatykhova, V. P. Kuznetsov, K. A. Kuptsov, M. I. Petrzhik, A. E. Kudryashov, Ph. V. Kiryukhantsev-Korneev |
| |
| Vol 17, No 2 (2023) |
Effect of modifiers on the structure formation and properties of nickel-phosphorus coatings applied to powder steels |
Abstract
PDF (Rus)
PDF (Eng)
|
|
I. N. Shcherbakov, B. G. Gasanov |
| |
| Vol 17, No 2 (2023) |
Investigation of the tribological characteristics of Ta–Zr–Si–B–C–N coatings |
Abstract
PDF (Rus)
PDF (Eng)
|
|
A. D. Sytchenko, R. A. Vakhrushev, Ph. V. Kiryukhantsev-Korneev |
| |
| Vol 17, No 1 (2023) |
Microstructure and phase composition of hard alloys produced from nanocrystalline powder mixture WC-6wt.%Co with C, Al and ZrC additives |
Abstract
PDF (Rus)
PDF (Eng)
|
|
S. V. Briakunov, A. S. Kurlov |
| |
| Vol 17, No 1 (2023) |
The influence of Ni on the composition, structure and properties of Ti-Cr-N coatings |
Abstract
PDF (Eng)
PDF (Rus)
|
|
A. V. Chernogor, I. V. Blinkov, D. S. Belov, V. S. Sergevnin, A. P. Demirov |
| |
| No 4 (2022) |
Air-thermal oxidation of diamond nanopowders obtained by the methods of mechanical grinding and detonation synthesis |
Abstract
PDF (Rus)
PDF (Eng)
|
|
P. P. Sharin, A. V. Sivtseva, V. I. Popov |
| |
| No 2 (2022) |
Structure and properties of Mo–Hf–Si–B coatings obtained by magnetron sputtering using MoSiB/Hf mosaic target |
Abstract
PDF (Rus)
|
|
A. D. Sytchenko, E. A. Levashov, Ph. V. Kiryukhantsev-Korneev |
| |
| No 2 (2022) |
Using explosion loading to obtain coatings of chromium carbide and titanium mixtures in deposition mode |
Abstract
PDF (Rus)
|
|
A. V. Krokhalev, V. O. Kharlamov, D. R. Chernikov, S. V. Kuz’min, V. I. Lysak |
| |
| No 1 (2022) |
Crack resistance, strength and dynamic fatigue of quartz fibers with copper coatings |
Abstract
PDF (Rus)
|
|
M. I. Bulatov, A. A. Shatsov, N. S. Grigoryev, N. A. Malkov |
| |
| No 4 (2021) |
Structure and wear resistance of coatings produced by the short-pulse laser alloying of titanium carbohydride-based mechanocomposites |
Abstract
PDF (Rus)
|
|
M. A. Eryomina, S. F. Lomayeva, E. V. Kharanzhevskiy |
| |
| No 4 (2021) |
Effect of the structure and morphology of Ni-based porous deposits on their electrocatalytic activity towards hydrogen evolution reaction |
Abstract
PDF (Rus)
|
|
T. S. Trofimova, A. B. Darintseva, T. N. Ostanina, V. M. Rudoi, I. E. Il’ina |
| |
| No 4 (2021) |
Production of fibers based on polyacrylonitrile with magnetite nanoparticles |
Abstract
PDF (Rus)
|
|
Z. A. Mansurov, G. T. Smagulova, B. B. Kaidar, A. B. Lesbayev, A. Imash |
| |
| No 2 (2021) |
Structure and properties of Ta–Si–N coatings obtained by pulsed magnetron sputtering |
Abstract
PDF (Rus)
|
|
A. D. Sytchenko, E. A. Levashov, Ph. V. Kiryukhantsev-Korneev |
| |
| No 2 (2021) |
Dependence of morphology, structure, composition and biocompatibility of Ca- and P-doped TiO 2 coatings on PEO process parameters |
Abstract
PDF (Rus)
|
|
V. A. Ponomarev, K. A. Kuptsov, A. N. Sheveyko, D. V. Shtansky |
| |
| No 3 (2021) |
Using the developed cavitation test to evaluate erosion resistance of cermet thermal sprayed coatings |
Abstract
PDF (Rus)
|
|
H. L. Alwan, A. V. Makarov, N. N. Soboleva, Yu. S. Korobov, V. I. Shumyakov, N. V. Lezhnin, V. A. Zavalishin |
| |
| No 3 (2021) |
Effect of nitrogen concentration in a gas mixture on the structure and properties of Zr–B–(N) coatings obtained by the HIPIMS method |
Abstract
PDF (Rus)
|
|
A. D. Sytchenko, S. B. Kabildina, Ph. V. Kiryukhantsev-Korneev |
| |
| No 4 (2020) |
Nanostructured strain-hardened aluminum-magnesium alloys modified by C60 fullerene obtained by powder metallurgy Part 2. The effect of magnesium concentration on physical and mechanical properties |
Abstract
PDF (Rus)
|
|
I. A. Evdokimov, R. R. Khayrullin, R. Kh. Bagramov, S. A. Perfilov, A. A. Pozdnyakov, V. V. Aksenenkov, B. A. Kulnitskiy |
| |
| No 3 (2020) |
Optimization of pyrolytic chromium carbide coating properties |
Abstract
PDF (Rus)
|
|
N. N. Schitov, A. A. Lozovan |
| |
| No 3 (2020) |
Investigation of the processes of the formation of a nonequilibrium phase-structural state in FeTiB films obtained by magnetron sputtering |
Abstract
PDF (Rus)
|
|
E. N. Sheftel, V. A. Tedzhetov, Ph. V. Kiryukhantsev-Korneev, E. V. Harin, G. Sh. Usmanova, O. M. Zhigalina |
| |
| No 3 (2020) |
Nanostructured strain hardened aluminum-magnesium alloys modified by C60 fullerene obtained by powder metallurgy. Part 1. Effect of magnesium concentration on the structure and phase composition of powders |
Abstract
PDF (Rus)
|
|
I. A. Evdokimov, R. R. Khayrullin, R. Kh. Bagramov, V. V. Aksenenkov, S. A. Perfilov, A. A. Pozdnyakov, B. A. Kulnitskiy, A. N. Kirichenko |
| |
| No 2 (2020) |
Mechanical properties and oxidation resistance of coatings in the Ta-Zr-Si-B-C-N system obtained by magnetron sputtering of a TaZrSiB target in an Ar, N2, and C2H4 atmosphere |
Abstract
PDF (Rus)
|
|
Ph. V. Kiryukhantsev-Korneev, A. D. Sytchenko, A. E. Levashov, T. A. Lobova |
| |
| No 2 (2020) |
Experimental determination and calculation of wear resistance coefficient for coatings with added nanodispersed carbide particles during laser deposition |
Abstract
PDF (Rus)
|
|
V. P. Biryukov, T. A. Bazlova |
| |
| No 1 (2020) |
Nanoscale nickel containing powders for use in CO and NO2 gas sensors |
Abstract
PDF (Rus)
|
|
M. V. Kuznetsov, A. V. Safonov, D. A. Bobreshov, O. V. Belousova, Iu. G. Morozov |
| |
| No 4 (2019) |
Nickel effect on the structure and properties of adaptive wear-resistant arc-PVD Ti–Al–Mo–N coatings |
Abstract
PDF (Rus)
|
|
V. S. Sergevnin, I. V. Blinkov, A. O. Volkhonskii, D. S. Belov |
| |
| No 4 (2019) |
Kinetics of dielectric coating formation on iron powders to obtain soft magnetic composite materials |
Abstract
PDF (Rus)
|
|
B. G. Gasanov, V. G. Tamadaev, V. O. Bogachev, E. R. Makhmudova |
| |
| No 4 (2019) |
Comparison of morphological and structural characteristics of nanopowder particles obtained by natural diamond grinding and detonation synthesis |
Abstract
PDF (Rus)
|
|
P. P. Sharin, A. V. Sivtseva, S. P. Yakovleva, M. M. Kopyrin, S. A. Kuzmin, V. I. Popov, L. A. Nikiforov |
| |
| No 2 (2019) |
Deposition of amorphous hardening coatings by electrospark treatment in a crystalline granule mixture |
Abstract
PDF (Rus)
|
|
A. A. Burkov, V. О. Krutikova |
| |
| No 2 (2019) |
Investigation of diffusion annealing processes of steels with multi-layer Ni–Al coating |
Abstract
PDF (Rus)
|
|
A. I. Kovtunov, A. M. Ostryanko, О. V. Shashkin, Т. V. Semistenova |
| |
| No 1 (2019) |
Features of the diamond films growth on the tungsten carbide surface by a copper underlayer |
Abstract
PDF (Rus)
|
|
D. S. Vokhmyanin, S. A. Oglezneva |
| |
| No 1 (2019) |
Phase transformations and properties of concentration-inhomogeneous magnetic materials based on the Fe–30%Cr–27%Co system |
Abstract
PDF (Rus)
|
|
V. A. Kozvonin, A. A. Shatsov, I. V. Ryaposov, K. N. Generalova, L. V. Spivak |
| |
| No 4 (2018) |
Cemented carbide cutting tools coated with silicon nitride |
Abstract
PDF (Rus)
|
|
V. S. Panov |
| |
| No 4 (2018) |
Hybrid technology combining electrospark alloying, cathodic arc evaporation and magnetron sputtering for hard wear-resistant coating deposition |
Abstract
PDF (Rus)
|
|
A. N. Sheveyko, K. A. Kuptsov, Ph. V. Kiryukhantsev-Korneev, E. A. Levashov, D. V. Shtansky |
| |
| No 3 (2018) |
Structure, mechanical properties and oxidation resistance of MoSi2, MoSiB and MoSiB/SiBC coatings |
Abstract
PDF (Rus)
|
|
F. V. Kiryukhantsev-Korneev, A. Yu. Potanin |
| |
| No 1 (2018) |
STUDYING STABILITY PROPERTIES OF PROTECTIVE COATINGS FORMED BY MICROARC OXIDATION FOR WORKPIECE GROUP PROCESSING |
Abstract
PDF (Rus)
|
|
V. B. Lyudin, A. V. Apelfeld, B. L. Krit, I. D. Fedichkin, V. V. Melikhov, D. B. Chudinov |
| |
| No 1 (2018) |
THE STUDY OF NANOSTRUCTURED ANATASE COATINGS ON THE SURFACE OF RUTILE |
Abstract
PDF (Rus)
|
|
S. E. Porozova, A. A. Gurov, O. Yu. Kamenschikov, O. A. Shuliatnikova, G. I. Rogozhnikov |
| |
| No 1 (2018) |
PHASE COMPOSITION AND WEAR RESISTANCE OF COATINGS FORMED ON VT6 (TI–6AL–4V) TITANIUM ALLOY BY PLASMA ELECTROLYTIC OXIDATION |
Abstract
PDF (Rus)
|
|
A. G. Rakoch, Phan Van Truong, A. A. Gladkova, N. A. Predein |
| |
| No 1 (2018) |
INVESTIGATION OF THE STRUCTURE AND OXIDATION MECHANISM OF FEALCR/AL2O3 DETONATION SPRAYED COATINGS |
Abstract
PDF (Rus)
|
|
P. A. Vityaz, T. L. Talako, A. I. Letsko, N. M. Parnitsky, M. S. Yakovleva |
| |
| No 1 (2018) |
INVESTIGATION OF SURFACE STRUCTURE, CRYSTALLOGRAPHIC TEXTURE, MICROTOPOGRAPHY OF FUNCTIONAL COATINGS DEPOSITED USING FLEXIBLE TOOL AND SOME APPLICATIONS. PART 2. INVESTIGATION OF THE EFFECT OF FUNCTIONAL COATINGS APPLIED USING FLEXIBLE TOOL ON SOME PROPERTIES OF MATERIALS AND APPLICATIONS |
Abstract
PDF (Rus)
|
|
I. V. Belevskaya, L. S. Belevskii, E. V. Gubarev, Yu. Yu. Efimova |
| |
| No 4 (2017) |
SEDIMENTATION OF ULTRADISPERSED DIAMONDS IN CITRATE COPPER PLATING ELECTROLYTE |
Abstract
PDF (Rus)
|
|
V. V. Yaskelchik, M. V. Ananyev, T. N. Ostanina, N. I. Ostanin, I. M. Zharskiy, A. A. Chernik |
| |
| No 4 (2017) |
INVESTIGATION OF SURFACE STRUCTURE, CRYSTALLOGRAPHIC TEXTURE, MICROTOPOGRAPHY OF FUNCTIONAL COATINGS DEPOSITED USING FLEXIBLE TOOL AND SOME APPLICATIONS. Part 1. Surface structure, crystallographic texture, microtopography of copper and brass coatings deposited on steel base using flexible tool |
Abstract
PDF (Rus)
|
|
I. V. Belevskaya, L. S. Belevskii, E. V. Gubarev, Yu. Yu. Efimova |
| |
| No 3 (2017) |
CONCEPTUAL PROTECTION MODEL FOR STRONGLY HEAT-RESISTANT MATERIALS IN HYPERSONIC OXIDIZING JET FLOWS |
Abstract
PDF (Rus)
|
|
V. S. Terentieva, A. N. Astapov |
| |
| No 3 (2017) |
PHYSICAL AND MECHANICAL PROPERTIES AND WEAR RESISTANCE OF CRN/ALN SYSTEM COATINGS DEPOSITED BY MAGNETRON SPUTTERING |
Abstract
PDF (Rus)
|
|
A. V. Aborkin, V. E. Vaganov, M. I. Alymov, A. I. Elkin, I. M. Bukarev |
| |
| No 1 (2017) |
THERMODYNAMIC ASSESSMENT OF CAPABILITY FOR DEPOSITION OF SILICON BORIDES FROM THEIR HALOGENIDES |
Abstract
PDF (Rus)
|
|
P. A. Timofeev, A. N. Timofeev |
| |
| No 4 (2016) |
EVALUATION OF THERMAL STABILITY OF MULTILAYER NANOSTRUCTURED COATINGS BY ANALYZING DIFFUSION MOBILITY OF LAYER COMPONENTS |
Abstract
PDF (Rus)
|
|
A. O. Volkhonskii, I. V. Blinkov, Yu. V. Levinsky, E. A. Skryleva |
| |
| No 4 (2016) |
INVESTIGATION OF BORON INFLUENCE ON THE STRUCTURE AND PROPERTIES OF MULTICOMPONENT NANOSTRUCTURED TiCaPCON COATINGS |
Abstract
PDF (Rus)
|
|
I. V. Sukhorukova, I. Yu. Zhitnyak, N. A. Gloushankova, D. V. Shtansky |
| |
| No 3 (2016) |
OBTAINING OF NICKEL AND COBALT COATING ALLOYS BY DIFFUSION SATURATION WITH DYSPROSIUM IN LiCl–KCl–DyCl3 MELT |
Abstract
PDF (Rus)
|
|
A. V. Kovalevskiy, D. A. Kondratyev |
| |
| No 3 (2016) |
TRY-OUT OF SPRAYING MODES AND PROPERTIES OF WEAR RESISTANT Al2O3–TiO2 FLAME COATINGS OBTAINED USING FLEXIBLE CORD MATERIAL |
Abstract
PDF (Rus)
|
|
A. S. Anikeev, I. V. Blinkov, V. V. Ivanov, A. I. Laptev, V. S. Chelnokov, I. Yu. Kuchina |
| |
| No 3 (2016) |
STRUCTURE AND STRENGTH PROPERTIES OF COPPER AND STAINLESS STEEL SOLDERED JOINT WITH FUNCTIONAL COPPER COATING |
Abstract
PDF (Rus)
|
|
B. N. Guzanov, G. V. Mineev |
| |
| No 2 (2016) |
Temperature dependency of the Fe–M (M – C, Ge, Sn) nanopowder heat capacity |
Abstract
PDF (Rus)
|
|
L. D. Zagrebin, A. M. Artanov, S. M. Perevozchikov, I. Yu. Mukhametshina |
| |
| No 2 (2016) |
Electrospark coatings of amorphous and nanocrystalline iron-based alloys |
Abstract
PDF (Rus)
|
|
I. S. Kuznetsov |
| |
| 1 - 60 of 89 Items |
1 2 > >>
|
